pitu tube problem

Post Reply
mir
Posts: 94
Joined: Fri Jul 26, 2019 5:43 am

pitu tube problem

Post by mir »

Hi John,
I had a small accident this morning which resulted in the pitu tube snapped off inside the housing. This means that it is impossible to attach a new pitu tube so I wander whether it would be possible to buy the lid (I have the screws and the gasket in perfect condition) on the Powerpod (v3) as a spare part while ordering a new pitu tube?

Regards,
Michael.
Velocomp
Velocomp CEO
Posts: 8016
Joined: Fri Jan 11, 2008 8:43 am

Re: pitu tube problem

Post by Velocomp »

You should be able to unscrew the broken portion of the tube from the case; use something, such as a phillips head screw driver, that you can squeeze into the port, then rotate the screw driver counterclockwise.

You can purchase a replacement pitot tube from our webstore.
John Hamann
mir
Posts: 94
Joined: Fri Jul 26, 2019 5:43 am

Re: pitu tube problem

Post by mir »

Velocomp wrote: Sat Feb 01, 2020 4:59 pm You should be able to unscrew the broken portion of the tube from the case; use something, such as a phillips head screw driver, that you can squeeze into the port, then rotate the screw driver counterclockwise.
That did it. Thanks.
Post Reply