I have recently started ramping up my triathlon game and got a TT Bike. However, i have had some issues trying to
A: get a good calibration or
B: maybe something is wrong with my trainer
![Wink ;)](./images/smilies/icon_e_wink.gif)
On the road, I am averaging less than 100 Watts/avg, and I feel like I am pushing much harder. On the trainer, I can easily maintain a 130-150 Watt/Avg.
troubleshooting:
- I have completed 3 different calibration rides on this bike, all with similar effects.
- I have verified that the Powerpod is angled correctly (on TT bars so had to 'nose' it down a bit, but it the PP logo is level to the ground - admittedly, i did have to smooth the rear mount stop (the square edge at the back of the mount prongs) to get this angle)
- switching profile back over to my road bike and I see/feel the correct wattages while riding my road bike
Firmware version is latest: 6.41
Me: 185 ish (heavy day)
Bike: A2 Speed Phreak ~ 20 lbs (ride ready: full kit, water, nutrition, shoes, etc)
Below are two files. Both rides were with calibrations. Roads are decent asphalt, traffic is not usually too bad.
Hopefully, you can see something i am doing wrong here
![Smile :)](./images/smilies/icon_e_smile.gif)
Let me know if you see anything crazy or need other information to start to narrow in a direction.
Thanks in advance, for any help!!
Aaron