TIRED 5 years and still useless
TIRED 5 years and still useless
I bought 2 units of powerpod versión 2.
I try at that time to make work,
Never can do the OUT AND BACK RIDE well after reading and update, even go to a special venue ride bike olimpic to make it perfect, but always powerpod go to 50, I stop but power pod jump to 52, arrived to 100 and red blink.
After a accident I coming back to bike.
PLAYING AGAIN I already reset all profile and data FROM ISAAC.
Even I change sensor for new ones. SAME ALL SAME OLD.
Please velocomp HELP ME.
I don’t know what’s more.
Thank u.
I want to make it work please.
What horrible xperience all that money lost. And counting.
I try at that time to make work,
Never can do the OUT AND BACK RIDE well after reading and update, even go to a special venue ride bike olimpic to make it perfect, but always powerpod go to 50, I stop but power pod jump to 52, arrived to 100 and red blink.
After a accident I coming back to bike.
PLAYING AGAIN I already reset all profile and data FROM ISAAC.
Even I change sensor for new ones. SAME ALL SAME OLD.
Please velocomp HELP ME.
I don’t know what’s more.
Thank u.
I want to make it work please.
What horrible xperience all that money lost. And counting.
Re: TIRED 5 years and still useless
You have 9 posts on the forum, as far back as 2017, and I re-read all of them. One of the posts had a two ride files--the data that we need in order to do analysis.
In the files you provided your rolling resistance was too low, but I doubt that is your problem.
This is going to be a slow process, but I want help you get your PP going.
You say you have 2 PowerPods. For BOTH PP, please do the following:
1. Attach a PP to your bike
2 Take pictures of PP as mounted on your bike: front and side views. The side view should how the unit is angled with respect to the ground.
3. Connect PP to Isaac. Go to "Edit/Edit Profiles". Click "Extract from Device"--this will provide the profile currently stored in your unit.
4. Click the "Export" button to export your profile to your desktop. Make sure to name the profile in a way that identifies it with your profile: "Profile bike 1" or "Profile bike 2".
5. Repeat steps 1-4 for your other PP.
Please post photos and profiles. After analyzing them I will provide next steps.
In the files you provided your rolling resistance was too low, but I doubt that is your problem.
This is going to be a slow process, but I want help you get your PP going.
You say you have 2 PowerPods. For BOTH PP, please do the following:
1. Attach a PP to your bike
2 Take pictures of PP as mounted on your bike: front and side views. The side view should how the unit is angled with respect to the ground.
3. Connect PP to Isaac. Go to "Edit/Edit Profiles". Click "Extract from Device"--this will provide the profile currently stored in your unit.
4. Click the "Export" button to export your profile to your desktop. Make sure to name the profile in a way that identifies it with your profile: "Profile bike 1" or "Profile bike 2".
5. Repeat steps 1-4 for your other PP.
Please post photos and profiles. After analyzing them I will provide next steps.
John Hamann
Re: TIRED 5 years and still useless
POWERPOD 2 MTB STUMPJUMPER
- Attachments
-
- Archive.zip
- (14.56 MiB) Downloaded 164 times
Re: TIRED 5 years and still useless
POWERPOD 1 ROAD DOGMA
- Attachments
-
- Archive.zip
- (14.09 MiB) Downloaded 177 times
Re: TIRED 5 years and still useless
thank you its there any chance to make this more dynamic?
Re: TIRED 5 years and still useless
I am traveling but will try to respond in the next day or so.
John Hamann
Re: TIRED 5 years and still useless
How I can do Ride files if it never go further than OUT AND BACK process? all the 2 are wipe out and be in a loop of the O&B process again again again.
boutght do the process to 50 DONT STOP and jump to 52, go 100 and start again.
thank you.
boutght do the process to 50 DONT STOP and jump to 52, go 100 and start again.
thank you.
Last edited by Kuryaky on Fri Feb 02, 2024 9:03 am, edited 2 times in total.
Re: TIRED 5 years and still useless
First thing I need to do it right my my O&B right.
Really want to make this thing really work.
Second maybe I can offer send my two units and have a for the +5 gen aeropod, maybe better way to do the things.
Really want to make this thing really work.
Second maybe I can offer send my two units and have a for the +5 gen aeropod, maybe better way to do the things.
Re: TIRED 5 years and still useless
Yes, I want it to work for you too!
Please see if there are any .ibr ride files in your unit. If so please post them here. These files will have lots of clues about what is going on.
John Hamann
Re: TIRED 5 years and still useless
I find some files on my powerpod2 stumjumper
- Attachments
-
- Velocomp_01_30_2024_1549_0_Miles_HiDef.ibr
- (6.86 KiB) Downloaded 161 times
-
- Velocomp_01_23_2024_2015_0_Miles_HiDef.ibr
- (9.57 KiB) Downloaded 157 times
Re: TIRED 5 years and still useless
There is hope!
One of your ride files had a working profile in it. Do the following:
1) Copy the attached profile on to your desktop
2) Connect PP to Isaac
3). Double click on the profile. This will add it to your "Edit/Edit Profiles" profile list
4). In The Edit/Edit Profiles window, click "Send to device". This will transfer your profile to your unit
5). Lock-up your front fork, then do a short ride with your PP
6). Post the .ibr ride file here
The problem may be that you are doing a cal ride with your front fork unlocked. this can cause problems with the cal ride. Once I see your updated ride file I will know better what is going on.
- Attachments
-
- kuryaky.ibp
- (410 Bytes) Downloaded 167 times
John Hamann
Re: TIRED 5 years and still useless
I go out to the bike park, and wipe all bought two PP.
And star again.
I bring 3 of my bikes 2 MTB PP 2.
And my road bike Pinareello F8 PP 1.
Looks de PP2 record ok.
PP 1 don’t record nothing.
I didn’t see your message before.
And star again.
I bring 3 of my bikes 2 MTB PP 2.
And my road bike Pinareello F8 PP 1.
Looks de PP2 record ok.
PP 1 don’t record nothing.
I didn’t see your message before.
- Attachments
-
- Velocomp_02_04_2024_1055_0_Miles_HiDef.ibr
- (13.17 KiB) Downloaded 171 times
-
- Velocomp_02_04_2024_1035_0_Miles_HiDef.ibr
- (17.02 KiB) Downloaded 161 times
Re: TIRED 5 years and still useless
I am sincerely confused:
1). You have not, until this post, explained that you are using 3 bikes: 2 MT, one road bike, and two different power pods. Please confirm!
2) You posted two ride files. These are from the same PP, but I don't know if this is one of your MTB PP or road PP
3) I don't know if you loaded the profile I sent you, on which bike this was intended to be used, or if you tested this profile on the corresponding bike.
4) I don't know which bike or PP was used in the two ride files you posted
5) For the ride files you posted, the profile used with them is NOT from the profile I asked you to use
6). I don't know why the ride files are so short
7) I don't know if you have different speed sensors on each of your three bikes. This is important to know
Given my confusion I am at a complete loss about what is going on with your units or how to help you.
John Hamann
Re: TIRED 5 years and still useless
1. Yes 2 PP, the number one if you see pictures on my road bikes. This PP never allow me download files. The number 2 are for my MTB Bikes, a Stumpjumper and a Camber, all files come from it.
2 those two file are from PP2 bought from stumjumper and Camber.
3. no i could load the file for my unit PP2 at the time you send me I was on Bike park, and just see it Later.
4.PP2 and the first time either PP2. Either bought from my MTB bikes.
5. Yes because i wipe out EVERYTHING on the two units, before start O&B procedures. I don’t use your profile YET.
6.i don’t get it either I was on bike park 1 hour ride in each bike 10 to 15 minutes. The Out and Back process finish ( that it’s a step further on my bought MTB not on my ROAD bike).
7. My MTB bikes today have each, SPEED, CADENCE, POWERMETER SIGEYI ( I buy tired to wait the units works), hearthrate strap.
I still want to PP works, power stroke análisis and CDA análisis.
What I have to do? Next step? How we can made this process better? Better online support?. Each answere take to long.
2 those two file are from PP2 bought from stumjumper and Camber.
3. no i could load the file for my unit PP2 at the time you send me I was on Bike park, and just see it Later.
4.PP2 and the first time either PP2. Either bought from my MTB bikes.
5. Yes because i wipe out EVERYTHING on the two units, before start O&B procedures. I don’t use your profile YET.
6.i don’t get it either I was on bike park 1 hour ride in each bike 10 to 15 minutes. The Out and Back process finish ( that it’s a step further on my bought MTB not on my ROAD bike).
7. My MTB bikes today have each, SPEED, CADENCE, POWERMETER SIGEYI ( I buy tired to wait the units works), hearthrate strap.
I still want to PP works, power stroke análisis and CDA análisis.
What I have to do? Next step? How we can made this process better? Better online support?. Each answere take to long.
Re: TIRED 5 years and still useless
Let's work on one bike and one powerpod at a time. Because you have so many variables in play we are going to need to do this slowly so that we can figure out what is going on:Kuryaky wrote: ↑Tue Feb 06, 2024 12:47 pm 1. Yes 2 PP, the number one if you see pictures on my road bikes. This PP never allow me download files. The number 2 are for my MTB Bikes, a Stumpjumper and a Camber, all files come from it.
2 those two file are from PP2 bought from stumjumper and Camber.
3. no i could load the file for my unit PP2 at the time you send me I was on Bike park, and just see it Later.
4.PP2 and the first time either PP2. Either bought from my MTB bikes.
5. Yes because i wipe out EVERYTHING on the two units, before start O&B procedures. I don’t use your profile YET.
6.i don’t get it either I was on bike park 1 hour ride in each bike 10 to 15 minutes. The Out and Back process finish ( that it’s a step further on my bought MTB not on my ROAD bike).
7. My MTB bikes today have each, SPEED, CADENCE, POWERMETER SIGEYI ( I buy tired to wait the units works), hearthrate strap.
I still want to PP works, power stroke análisis and CDA análisis.
What I have to do? Next step? How we can made this process better? Better online support?. Each answere take to long.
1. For the PP you use with your two mtbs, connect your PPMTB (the PP you use with your mountain bikes) to Isaac
2. Go to "Edit/Edit Profiles"
3. Click the button "extract from device". This will show the active profile in your device. TAKE A SCREEN SHOT OF WHAT YOU SEE (in my example it is profile 3)
4. At the bottom of the window use the dropdown menu "Set Active Profile in Device" to profile 1
5. Click the "Extract from Device" button. You will extract profile 1 from your PP into Isaac, and it will be labeled as such:
6. Click the "Export..." button; you will see a screen something like this: 7. Replace the highlighted word "untitled" with the word "MTB Profile 1"
8. Go back to step 4, and repeat steps 4-7 for profile 2, 3 and 4, making sure to label the corresponding exported profiles 2, 3 and 4
9. Post here your screen shot and your four profiles.
This will let me understand what is currently in your PPMTB. After that we will proceed to the next steps.
John Hamann
Re: TIRED 5 years and still useless
hello i got it.
PP2 profile2
PP2 profile1
PP2 profile2
PP2 profile1
- Attachments
-
- IMG_2538.jpeg (249.96 KiB) Viewed 7727 times
-
- IMG_2537.jpeg (264.18 KiB) Viewed 7727 times
-
- PP2 Profiles.zip
- (855 Bytes) Downloaded 153 times
Re: TIRED 5 years and still useless
You did not do as I asked.
You provided profiles 1 and 2, but did not provide profiles 3 and 4.
This will go much faster if you provide what I request.
You provided profiles 1 and 2, but did not provide profiles 3 and 4.
This will go much faster if you provide what I request.
John Hamann
Re: TIRED 5 years and still useless
I never never use profile 3 and 4.
I will post it later.
Bought are empty, and the forum just let me upload 3 files per post.
I will post it later.
Bought are empty, and the forum just let me upload 3 files per post.
Re: TIRED 5 years and still useless
Post Profile 3 and 4
- Attachments
-
- IMG_2545.jpeg (279.29 KiB) Viewed 7690 times
-
- IMG_2544.jpeg (248.25 KiB) Viewed 7690 times
-
- PP2 Profiles empty.zip
- (796 Bytes) Downloaded 183 times
Re: TIRED 5 years and still useless
I would get any further assistance please.
Re: TIRED 5 years and still useless
i going out today to ride on my camber PP2 Profike 2.
the powerpod record something.
here are the files.
xtrage the PP just record 1 hour but my ride was 2.
the powerpod record something.
here are the files.
xtrage the PP just record 1 hour but my ride was 2.
- Attachments
-
- Velocomp_02_10_2024_0633_10_Miles_HiDef.ibr
- (607.99 KiB) Downloaded 163 times
-
- PP2 Profile2 camber 10-2-24.ibp
- (458 Bytes) Downloaded 163 times
Re: TIRED 5 years and still useless
another ride PP2 profile 2 camber either share you my garmin with my dfpm file .fit
now the powerpod its recording but my ride was 1 hour and just record 40 minutes.
now the powerpod its recording but my ride was 1 hour and just record 40 minutes.
- Attachments
-
- 13914489986.zip
- (105.9 KiB) Downloaded 163 times
-
- Velocomp_02_11_2024_0717_9_km_HiDef.ibr
- (322.49 KiB) Downloaded 188 times
-
- PP2 Profile2 camber 11-02-24.ibp
- (458 Bytes) Downloaded 164 times
Re: TIRED 5 years and still useless
I will get any help from you?
I never bought a device that in seven 7 years don’t work properly even from the start.
The lack of support for final user more than manual and some users videos, do you has to have more xplanatory content.
I never bought a device that in seven 7 years don’t work properly even from the start.
The lack of support for final user more than manual and some users videos, do you has to have more xplanatory content.
Re: TIRED 5 years and still useless
I have looked at your ride files and something sticks out: most of the time your bike speed is only about 4 mph.
Also: there are gross discrepancies between your elevation-measured slope and the accelerometer slope. Is this ride from a mountain bike? If so do you have your front fork locked-up? If this ride was on your MTB and you did not have the front fork locked, that would explain the issues.
Please post photos of the bike you used in this ride. I know you have two bikes; the road bike Pinarello should be fine.
Also: there are gross discrepancies between your elevation-measured slope and the accelerometer slope. Is this ride from a mountain bike? If so do you have your front fork locked-up? If this ride was on your MTB and you did not have the front fork locked, that would explain the issues.
Please post photos of the bike you used in this ride. I know you have two bikes; the road bike Pinarello should be fine.
John Hamann
Re: TIRED 5 years and still useless
Have a good one I double check it the fork was blocked.
PP 2 mountain bike’s
PP 1 road bike’s
PP2
PROFILE 1 STUMPJUMPER MTB
PROFILE 2 CAMBER MTB
This was record on Profile 2 CAMBER MTB
PHOTOS:
PP 2 mountain bike’s
PP 1 road bike’s
PP2
PROFILE 1 STUMPJUMPER MTB
PROFILE 2 CAMBER MTB
This was record on Profile 2 CAMBER MTB
PHOTOS:
- Attachments
-
- IMG_3002.jpeg (232.7 KiB) Viewed 7184 times
-
- IMG_3004.jpeg (194.24 KiB) Viewed 7184 times
-
- IMG_3003.jpeg (185.09 KiB) Viewed 7184 times
Re: TIRED 5 years and still useless
Please do the following:
1) Remove your PP from the mountain bike where you are posting ride files
2) Attach the removed PP to Isaac and change its profile to an unused profile, using the command Edit/Edit Profiles/Set Active Profile. For example, if your PP for your MTB is set to profile 1, change your active profile to profile 2
2) Attach the removed PP to your road bike
3) Do a sensor pairing of the PP on your road bike (make sure your MTB sensors are off)
4) Do a cal ride with your road bike, followed by a 5 mile road ride
5) Download the road bike 5 mile ride and post here
This will allow me to determine if there is a problem with your PP or, perhaps, a problem with its mounting on your mountain bike
1) Remove your PP from the mountain bike where you are posting ride files
2) Attach the removed PP to Isaac and change its profile to an unused profile, using the command Edit/Edit Profiles/Set Active Profile. For example, if your PP for your MTB is set to profile 1, change your active profile to profile 2
2) Attach the removed PP to your road bike
3) Do a sensor pairing of the PP on your road bike (make sure your MTB sensors are off)
4) Do a cal ride with your road bike, followed by a 5 mile road ride
5) Download the road bike 5 mile ride and post here
This will allow me to determine if there is a problem with your PP or, perhaps, a problem with its mounting on your mountain bike
John Hamann
Re: TIRED 5 years and still useless
Already done.
thank you.
thank you.
- Attachments
-
- Velocomp_02_20_2024_0458_16_km_HiDef.ibr
- (530.96 KiB) Downloaded 163 times
-
- Dogma65Profile4PP2.ibp
- (435 Bytes) Downloaded 127 times
Re: TIRED 5 years and still useless
Thank you; this is good information.
Here is what appears to be going on:
1) On your MTB your lockout seems to not totally prevent your front fork from moving up and down. In general, your PP works well on your MTB. However, at the end of your climb, where you have a really steep slope, your front fork compression changes, causing the PP angle to change, causing high watts. I know this because the PP adjusts its settings continuously in response to changes in mounting angle. If there is no change in PP orientation, the "slope offset" number remains nearly constant, but on your steep hills (around time 14:30) the slope offset number goes crazy, as does the difference between PP watts (white) and DFPM watts (green).
This means that something is causing its angle to change. Does your MTB also have rear adjustable forks?
2) Your road bike ride looks fine. There are no issues with your PP performance; therefore, I conclude that your PP is working properly.
To summarize: I think your PP works well on your road bike. Most of the time your PP also works well on your MTB, but if the front fork pumps AT ALL, then where it does your PP will have problems.
Here is what appears to be going on:
1) On your MTB your lockout seems to not totally prevent your front fork from moving up and down. In general, your PP works well on your MTB. However, at the end of your climb, where you have a really steep slope, your front fork compression changes, causing the PP angle to change, causing high watts. I know this because the PP adjusts its settings continuously in response to changes in mounting angle. If there is no change in PP orientation, the "slope offset" number remains nearly constant, but on your steep hills (around time 14:30) the slope offset number goes crazy, as does the difference between PP watts (white) and DFPM watts (green).
This means that something is causing its angle to change. Does your MTB also have rear adjustable forks?
2) Your road bike ride looks fine. There are no issues with your PP performance; therefore, I conclude that your PP is working properly.
To summarize: I think your PP works well on your road bike. Most of the time your PP also works well on your MTB, but if the front fork pumps AT ALL, then where it does your PP will have problems.
John Hamann
Re: TIRED 5 years and still useless
My camber MTB bike have 2 suspension front fork and rear.
So that I can use powerpod in road bike as CDA MESSURE with my Garmin 1030?
How it’s the procedure to do that?
What about road dogma65 accuarate versus DFPM?
Thank you.
So that I can use powerpod in road bike as CDA MESSURE with my Garmin 1030?
How it’s the procedure to do that?
What about road dogma65 accuarate versus DFPM?
Thank you.