What do I do if I lose my wireless pairing?
Posted: Sat Mar 29, 2008 9:15 am
1) If you lose your wireless pairing AND you have previously saved a profile that included the pairing codes, simply upload your profile to your iBike and your pairing should be restored.
2) If step one fails, then you have one of two problems: 1) your old profile doesn't have the correct codes stored in them; 2) you removed the sensor batteries prior to trying step one
If step 1) fails and you HAVE NOT performed the multiple coast-down and 4 mile ride:
1) If you haven't performed the multiple coast-down and four mile ride calibration, NOW IS A GREAT TIME TO DO SO. Pair your sensors, perform the calibration, analyze your data with iBike 2, then ACCEPT PROFILE AND UPLOAD TO IBIKE. This sends your composite data to the iBike AND saves your profile (including correct pairing data) to your computer.
OR
If step 1) fails and you HAVE performed (and saved) the multiple coast-down and 4 mile ride:
1) Using iBike 2 upload your saved profile to your iBike (this step makes sure you have the correct calibration data stored in your iBike).
2) Re-pair your sensors
3) Connect your iBike to your USB adapter and launch iBike 2
4) Go to Profiles/Edit Profiles...
5) Highlight the Profile that is stored in your iBike
6) Click on the "Advanced Profile Settings" button
7) Check the box that says "Wireless Enable"
8) Click the button that says "Get from iBike". THIS STEP CAPTURES THE NEW PAIRING CODES CREATED IN STEP 2. If you're running 2.0.4 or higher you will see the pairing codes appear in the windows.
9) Click the "Accept" button. Return to the main window and click the "Accept" button again!
Your NEW pairing codes are now stored with your OLD profile
2) If step one fails, then you have one of two problems: 1) your old profile doesn't have the correct codes stored in them; 2) you removed the sensor batteries prior to trying step one
If step 1) fails and you HAVE NOT performed the multiple coast-down and 4 mile ride:
1) If you haven't performed the multiple coast-down and four mile ride calibration, NOW IS A GREAT TIME TO DO SO. Pair your sensors, perform the calibration, analyze your data with iBike 2, then ACCEPT PROFILE AND UPLOAD TO IBIKE. This sends your composite data to the iBike AND saves your profile (including correct pairing data) to your computer.
OR
If step 1) fails and you HAVE performed (and saved) the multiple coast-down and 4 mile ride:
1) Using iBike 2 upload your saved profile to your iBike (this step makes sure you have the correct calibration data stored in your iBike).
2) Re-pair your sensors
3) Connect your iBike to your USB adapter and launch iBike 2
4) Go to Profiles/Edit Profiles...
5) Highlight the Profile that is stored in your iBike
6) Click on the "Advanced Profile Settings" button
7) Check the box that says "Wireless Enable"
8) Click the button that says "Get from iBike". THIS STEP CAPTURES THE NEW PAIRING CODES CREATED IN STEP 2. If you're running 2.0.4 or higher you will see the pairing codes appear in the windows.
9) Click the "Accept" button. Return to the main window and click the "Accept" button again!
Your NEW pairing codes are now stored with your OLD profile