New FW 714 for AeroPod and PowerPod

Post Reply
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

New FW 714 for AeroPod and PowerPod

Post by Velocomp »

We've just released FW 714 for AeroPod (and PowerPod too)!

1) AeroPod only:
a. Profile 4 is “CdA Testing” mode. See AeroPod instructions for details
b. Profile 3 is “CdA Trends” mode. See AeroPod instructions for details
c. AeroPod instructions are available at https://velocompforum.com/viewtopic.php?f=98&t=4765

2) AeroPod and PowerPod: after hard-reset, Date/Time stored in device prior to reset is maintained.

3) AeroPod and PowerPod: bug fixes

You can get the new FW from Isaac, "Device/Check Online for Firmware Update..."

You will get an update request if the FW currently used in your device is greater than 7.00 (original PowerPods are not compatible with this upgrade)
John Hamann
oleksiy
Posts: 11
Joined: Sat Mar 23, 2019 3:45 pm

Re: New FW 714 for AeroPod and PowerPod

Post by oleksiy »

Hello,

I'm still getting "You already have the most recent firmware in the unit: 7.12"

AeroPod S/N: 12-04-18-08-06-0C-B1-00-03-00-93-03-BE-7F-20-13
Isaac for Mac: 4.1.1
Attachments
Screen Shot 2020-06-01 at 8.46.21 AM.png
Screen Shot 2020-06-01 at 8.46.21 AM.png (68.29 KiB) Viewed 4865 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: New FW 714 for AeroPod and PowerPod

Post by Velocomp »

You need to update to Isaac 5.1 before updating to 7.14
John Hamann
Post Reply