upon connecting - no stored profiles in AP

Post Reply
michal
Posts: 10
Joined: Thu Oct 25, 2018 12:04 pm

upon connecting - no stored profiles in AP

Post by michal »

Is this normal?
When connected to PC - all were blank.
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: upon connecting - no stored profiles in AP

Post by Velocomp »

1) Connect AP to Isaac

2) Go to "Edit/Edit Profiles"

3) Click "Extract from Device". This will be the profile information for the profile active in your AP

4) Click the "Export" button. Export the profile to your desktop

5) Please post the profile to this thread.

We will figure out what is going on!
John Hamann
michal
Posts: 10
Joined: Thu Oct 25, 2018 12:04 pm

Re: upon connecting - no stored profiles in AP

Post by michal »

Done today; I tried to reset the unit, hope it helps.
Tomorrow I'll hit the boards of indoor velodrome - will try to calibrate again.
michal_szlezak_profiles_12112018.ibp
(460 Bytes) Downloaded 194 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: upon connecting - no stored profiles in AP

Post by Velocomp »

The profile you downloaded is the factory default profile. It does not have any of your rider information in it, and it does not have any of your sensor IDs. You will not be able to use this profile to calibrate your AP.

Please watch the video linked below. It will take you through the setup process. If you have any problems, please let us know where in the video you run into trouble!

https://youtu.be/198XSnl6gnA
John Hamann
michal
Posts: 10
Joined: Thu Oct 25, 2018 12:04 pm

Re: upon connecting - no stored profiles in AP

Post by michal »

the newest file - did the calib ride to the letter (hopefully) - but amazingly low readings for CdA...
profile_recent.ibp
(460 Bytes) Downloaded 164 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: upon connecting - no stored profiles in AP

Post by Velocomp »

michal wrote: Wed Nov 21, 2018 9:39 pm the newest file - did the calib ride to the letter (hopefully) - but amazingly low readings for CdA...profile_recent.ibp
Please post the .ibr ride file recorded AFTER your cal ride was completed.
John Hamann
Post Reply