Page 1 of 2

Introducing AeroPod!

Posted: Wed Apr 18, 2018 8:04 pm
by Velocomp
We are very excited to announce our newest project, AeroPod!

AeroPod is both a next-generation power meter, AND a dynamite way to measure on-the-road CdA!

We have launched AeroPod on Kickstarter; check it out here: https://www.kickstarter.com/projects/po ... rm=aeropod:

Re: Introducing AeroPod!

Posted: Wed Apr 18, 2018 11:10 pm
by ldmitruk
Looks very interesting. Does the pitot tube have to be used all the time or only for more accurate reading and Cda measurement.

Re: Introducing AeroPod!

Posted: Thu Apr 19, 2018 12:04 am
by Velocomp
Great question! AeroPod will also work without the pitot tube, too. For dialed-in CdA, we recommend using pitot tube.

Re: Introducing AeroPod!

Posted: Thu Apr 19, 2018 8:18 am
by ldmitruk
Is that the only handle bar mount or is there a different one for roadbikes?

Re: Introducing AeroPod!

Posted: Thu Apr 19, 2018 9:33 am
by Velocomp
AeroPod works on standard road bikes, too. We'll post more photos soon.

Re: Introducing AeroPod!

Posted: Thu Apr 19, 2018 12:08 pm
by kdx200
John,
Do this new aeropod "replace" our powerpod including the new feature or its a complementary?

im very interested in the aeropod but dont like to buy another power meter since aim in love with my powerpod.

Thank you!

Re: Introducing AeroPod!

Posted: Thu Apr 19, 2018 1:44 pm
by spangelsaregreat
Hi,

Interesting, couple of questions.

Does the use of the pitot tube fix the issue of Powerpod stopping working in heavy rain?

Does the aerodynamic features mean that power will record accurately in any position on the bike. As in how Powerpod currently can over record power on descents if you ride on the drops.

Look forward to some reviews of this.

Regards

Re: Introducing AeroPod!

Posted: Sun Apr 22, 2018 9:17 pm
by Velocomp
ldmitruk wrote: Thu Apr 19, 2018 8:18 am Is that the only handle bar mount or is there a different one for roadbikes?
Sorry, I was at Sea Otter and did not find these posts...

AeroPod ships with a standard handlebar mount for road bikes.

Re: Introducing AeroPod!

Posted: Sun Apr 22, 2018 9:19 pm
by Velocomp
kdx200 wrote: Thu Apr 19, 2018 12:08 pm John,
Do this new aeropod "replace" our powerpod including the new feature or its a complementary?

im very interested in the aeropod but dont like to buy another power meter since aim in love with my powerpod.

Thank you!
Well, that's kinda like asking if the iPhone 10 is better than the iPhone 8...

We've done some upgrades in AeroPod that will improve its performance as a power meter, and also enable CdA measurement. But if you love your PowerPod, well, so do we :-)

Re: Introducing AeroPod!

Posted: Sun Apr 22, 2018 9:20 pm
by Velocomp
spangelsaregreat wrote: Thu Apr 19, 2018 1:44 pm Hi,

Interesting, couple of questions.

Does the use of the pitot tube fix the issue of Powerpod stopping working in heavy rain?

Does the aerodynamic features mean that power will record accurately in any position on the bike. As in how Powerpod currently can over record power on descents if you ride on the drops.

Look forward to some reviews of this.

Regards
Pitot tube should definitely improve performance in heavy rain.

If you're using AeroPod with a DFPM, you'll see improvements on descents.

Check out DC Rainmaker's review!

Re: Introducing AeroPod!

Posted: Tue May 01, 2018 2:56 pm
by mikee
Velocomp wrote: Sun Apr 22, 2018 9:19 pm
kdx200 wrote: Thu Apr 19, 2018 12:08 pm John,
Do this new aeropod "replace" our powerpod including the new feature or its a complementary?

im very interested in the aeropod but dont like to buy another power meter since aim in love with my powerpod.

Thank you!
Well, that's kinda like asking if the iPhone 10 is better than the iPhone 8...

We've done some upgrades in AeroPod that will improve its performance as a power meter, and also enable CdA measurement. But if you love your PowerPod, well, so do we :-)
I kinda get your iPhone 10 and 8 suggestion but can you elaborate? If I'm only considering the AeroPod for power numbers, how does its performance as a power meter improve? is it more accurate than the PP? Can it provide CdA without a separate DFPM?

Re: Introducing AeroPod!

Posted: Tue May 01, 2018 4:21 pm
by Velocomp
AeroPod operates as a stand-alone power meter.

It's electronics, wind measurement system, and firmware are improved compared to PowerPod, and in our testing, we do see improved performance in cross-wind situations in particular.

I'm NOT knocking PowerPod...it remains a great product.

At present, AeroPod will require a DFPM if you want to do CdA measurements.

Re: Introducing AeroPod!

Posted: Wed May 16, 2018 4:36 am
by TuRu00
Hello!

I have some questions:

If DFPM (all of them broadcasts cadence), a cadence sensor it is still needed? As far as I know, now on PowerPod there is no way to use the cadence data from the DFPM. ¿An speed sensor it is still needed?

¿DFPM additional data like pedal smoothness and torque effectiveness is read from Aeropod (and written / broadcasted)?

¿On Garmin, do I need to pair the Aeropod as the "main" PM to get the CDA data? ¿Or uses another ANT+ stream? ¿Is it possible to use the DFPM as the power source and get just the CDA data from Aeropod?

Thanks!

Re: Introducing AeroPod!

Posted: Wed May 16, 2018 5:58 am
by Velocomp
1) PP picks up DFPM cadence data. Additional sensor not required

2) AeroPod does not record DFPM additional data. If your bike computer displays it, that's where you see it

3) PP receives DFPM data. PP transmits DFPM power, CdA, wind speed, time advantage, slope, data

Re: Introducing AeroPod!

Posted: Fri May 18, 2018 2:25 am
by TuRu00
Velocomp wrote: Wed May 16, 2018 5:58 am 1) PP picks up DFPM cadence data. Additional sensor not required

2) AeroPod does not record DFPM additional data. If your bike computer displays it, that's where you see it

3) PP receives DFPM data. PP transmits DFPM power, CdA, wind speed, time advantage, slope, data
I guess you mean Aeropod, not PP. Correct?

Re: Introducing AeroPod!

Posted: Fri May 18, 2018 5:44 am
by Velocomp
Yes, my bad.

1) AeroPod picks up DFPM cadence data. Additional sensor not required

2) AeroPod does not record additional DFPM data such as pedal smoothness. If your bike computer displays it, that's where you see it

3) AeroPod receives DFPM data. AeroPod transmits DFPM power, CdA, wind speed, time advantage, slope, data

Re: Introducing AeroPod!

Posted: Mon May 28, 2018 2:58 am
by Docsport77
HI,
is the device recording all the data for later analysis, or is it mandatory to pair a Garmin to record the ride data?

Thanks!

Carsten

Re: Introducing AeroPod!

Posted: Mon May 28, 2018 3:31 am
by TuRu00
Velocomp wrote: Fri May 18, 2018 5:44 am Yes, my bad.

1) AeroPod picks up DFPM cadence data. Additional sensor not required

2) AeroPod does not record additional DFPM data such as pedal smoothness. If your bike computer displays it, that's where you see it

3) AeroPod receives DFPM data. AeroPod transmits DFPM power, CdA, wind speed, time advantage, slope, data
A other couple of questions, please.

If DFPM, speed sensor is needed to measure cda?

If no DFPM, both sensors (speed / cadence) are recommended to get power on Garmin?

Thanks.

Re: Introducing AeroPod!

Posted: Mon May 28, 2018 6:18 am
by Velocomp
1) Speed sensor is required for AeroPod to function

2) Yes

Re: Introducing AeroPod!

Posted: Wed Jun 06, 2018 2:41 pm
by jonnytheroadie
Hey guys, am I going crazy or is there no Aeropod mention on your website anymore for some reason? https://velocomp.com/ New landing page perhaps?

Re: Introducing AeroPod!

Posted: Wed Jun 06, 2018 3:45 pm
by Velocomp
Coming very soon...

Re: Introducing AeroPod!

Posted: Thu Jun 28, 2018 9:47 pm
by blp
John, can you elaborate on the advancements in the AeroPod over PowerPod and, of particular interest to me, the Newton 6?

(Dang, I wish I knew about the Kickstarter project!)

Re: Introducing AeroPod!

Posted: Fri Jun 29, 2018 7:03 am
by Velocomp
Lots of important changes:

1) new, better performing wind sensor
2) new, better performing accelerometer
3) new pitot tube design provides better wind measurement, particularly in cross winds
4) new microprocessor. faster, more memory
5) complete redesign of calibration procedure. Out-and-back is standard, but now take only 5 minutes total
6) auto recalibration at beginning of ride takes only 90 seconds, vs 8 minutes previously
7) CdA measurement is enabled
8) transmits CdA, wind, slope, and Time Advantage to compatible bike computers
9) powerstroke, GPS Tracker and BLE compatibility are standard
10) complete redesign of case
11) new, under-the-bars mount accessory for "aero-shaped" bars
12) calibration ride files no longer recorded (they are confusing and don't provide useful information)

Re: Introducing AeroPod!

Posted: Fri Jun 29, 2018 11:26 am
by blp
That's quite a list!

Re: Introducing AeroPod!

Posted: Wed Jul 04, 2018 9:43 am
by texbiker
Will there be a trade in option for PowerPod owners?

Re: Introducing AeroPod!

Posted: Wed Jul 04, 2018 11:08 am
by Velocomp

Re: Introducing AeroPod!

Posted: Mon Jul 16, 2018 2:27 pm
by blp
Congrats as Eurobike 2018 Product Category Winner!

Re: Introducing AeroPod!

Posted: Mon Jul 16, 2018 2:45 pm
by blp
Can the Aeropod be used without a bike computer and have the data uploaded and reviewed in Isaac later?

Re: Introducing AeroPod!

Posted: Tue Jul 24, 2018 5:04 am
by TuRu00
Hello again!!

Can't wait to receive my Aeropod!! Meanwhile i do have some questions. Cda, Slope, Time advantage, etc are written on .fit, right? Can be shown and analyzed on Garmin Connect?

Have you tried importing .CSV files from Isaac in Golden Cheetah? Does Golden Cheetah read that data (cda, slope, etc,) as it does now with windspeed?

Thanks!

Re: Introducing AeroPod!

Posted: Tue Jul 24, 2018 6:32 am
by Velocomp
blp wrote: Mon Jul 16, 2018 2:45 pm Can the Aeropod be used without a bike computer and have the data uploaded and reviewed in Isaac later?
Yes. You can use the Tools/CdA Analysis function of Isaac to get all your data.