to dumb to make it work :-(
Posted: Sat Jun 19, 2021 11:06 am
Hello there
I really spent some time with reading forum posts and testing and trying but I just cant figure this out.
My experience in bullet points
- initial (after shipping) calibration could only be done after hard resetting the device
- when setting up a second bike (different sensors) powerpod forgot about the first bike
- connecting to Isaac to download and/or tweak profile powerpod - going back on my bike powerpod was in o&b calibration mode when starting to ride
- downloading profile#2 from isaac, altering and uploading again seemed to overwrite profile#1
- during rides pp would sometimes send no power data then sending again after some time, other times stop the ride so I have to manually wake it up
- when o&b calibration ride was unsuccessfull (eg. I accidentally started, could not turn around, wind suddenly changed...) PP showed 50Watt for ages. I could not reset, redo, undo calibration. Only means was dialing in some profile via powerhouse app
- I seem to get doublettes of rides when connecting PP
- all in all after every change of bikes and/or changes to profiles (done in isaac) I have severe problems with PP
What I hoped to do:
- connect PP to PC
- dial in 2 profiles for 2 bikes (in Isaac)
- send profiles to PP
- ride and have PP select the proper profiles (without the need for o&b)
- maybe do a short o&b to recalibrate PP
Attached files show me desperate tries to get this thing calibrated and working. I really hope you can help me since I dont have much more energy for fumbling around for ages to get this working...
Regards
Roger
I really spent some time with reading forum posts and testing and trying but I just cant figure this out.
My experience in bullet points
- initial (after shipping) calibration could only be done after hard resetting the device
- when setting up a second bike (different sensors) powerpod forgot about the first bike
- connecting to Isaac to download and/or tweak profile powerpod - going back on my bike powerpod was in o&b calibration mode when starting to ride
- downloading profile#2 from isaac, altering and uploading again seemed to overwrite profile#1
- during rides pp would sometimes send no power data then sending again after some time, other times stop the ride so I have to manually wake it up
- when o&b calibration ride was unsuccessfull (eg. I accidentally started, could not turn around, wind suddenly changed...) PP showed 50Watt for ages. I could not reset, redo, undo calibration. Only means was dialing in some profile via powerhouse app
- I seem to get doublettes of rides when connecting PP
- all in all after every change of bikes and/or changes to profiles (done in isaac) I have severe problems with PP
What I hoped to do:
- connect PP to PC
- dial in 2 profiles for 2 bikes (in Isaac)
- send profiles to PP
- ride and have PP select the proper profiles (without the need for o&b)
- maybe do a short o&b to recalibrate PP
Attached files show me desperate tries to get this thing calibrated and working. I really hope you can help me since I dont have much more energy for fumbling around for ages to get this working...
Regards
Roger