Power Pod V3 Low reading

Post Reply
Dalibor
Posts: 4
Joined: Mon Mar 16, 2020 3:31 pm

Power Pod V3 Low reading

Post by Dalibor »

John hi,

I'm using V3 for quite some time, and I'm pretty happy with it. Recently, I changed the bike, made some tweaking on my profile, and did the calibration ride. Everything went well, but afterwards I had noticed low reading on my power output.
I did a test ride against my Assioma Duo, and my suspicions was confirmed. Powerpod readings are some 20% lover then my Assioma's.
Could you be so kind, and take a look on my ibr and tcx files of the same ride, and tweak my profile so they match?

Thank you very much!
BR,
Dalibor
Attachments
iBike_02_11_2023_1305_24_km.ibr
(225.01 KiB) Downloaded 68 times
Infinito 2023.ibp
(503 Bytes) Downloaded 63 times
activity_10488777079 (1).tcx
(2.66 MiB) Downloaded 64 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Power Pod V3 Low reading

Post by Velocomp »

Here is what I did:

1) I merged your .tcx file into your PP file. This merges your Assioma data into your PP ride file
Screen Shot 2023-02-14 at 6.59.00 PM.png
Screen Shot 2023-02-14 at 6.59.00 PM.png (205.58 KiB) Viewed 743 times
2) I used the command "Check Calibration" to check the DFPM data against your ride file
Screen Shot 2023-02-14 at 7.00.48 PM.png
Screen Shot 2023-02-14 at 7.00.48 PM.png (41.83 KiB) Viewed 743 times
Screen Shot 2023-02-14 at 7.02.34 PM.png
Screen Shot 2023-02-14 at 7.02.34 PM.png (21.04 KiB) Viewed 743 times

3) I used the DFPM data to adjust your profile
Screen Shot 2023-02-14 at 7.03.05 PM.png
Screen Shot 2023-02-14 at 7.03.05 PM.png (53.29 KiB) Viewed 743 times
4). This change improved your wind scaling and increased your watts
Screen Shot 2023-02-14 at 7.04.00 PM.png
Screen Shot 2023-02-14 at 7.04.00 PM.png (229.77 KiB) Viewed 743 times
Corrected ride file and profile are attached
Attachments
Dalibor.ibp
(635 Bytes) Downloaded 63 times
Dalibor_Corr_02_11_2023_1305_24_km.ibr
(415.11 KiB) Downloaded 68 times
John Hamann
Dalibor
Posts: 4
Joined: Mon Mar 16, 2020 3:31 pm

Re: Power Pod V3 Low reading

Post by Dalibor »

John hi,

thx for the instructions & corrections to the profile!

Br,

Dalibor
Post Reply