Calibration look-see!

Post Reply
1k2go
Posts: 2
Joined: Wed Sep 04, 2013 8:59 pm

Calibration look-see!

Post by 1k2go »

Hi John,

I was hoping you might have a look at my post calibration ride.

I'm setting up a gravel bike so there are a lot of mixed surfaces on this file. It's a good representation of my outdoor rides will look like. It was quite windy today as well.

Bike:
Specialized Diverge with the PowerPod mounted out front. (I used profile 2)
Tires are 40mm/40psi

I'm using Garmin speed/cadence sensor with the speed sensor on the front hub. (New Batteries in both) I could not get the cadence sensor to recognize through the PowerPod, so I connected directly through the head unit. I'm unsure if that effects the calibration.

I also noticed I had Dynamic selected after my cal. ride. I'll change it to 5 second after your recommendations.

It's pretty tough to find any length of road flat here in NH. :)

Thank in advance,
Marc
Attachments
Velocomp_07_20_2018_0015_16_Miles.ibr
(34.87 KiB) Downloaded 116 times
GravelBike.Profile.ibp
(368 Bytes) Downloaded 119 times
PXL_20210627_150905430.PORTRAIT_2.jpg
PXL_20210627_150905430.PORTRAIT_2.jpg (127.99 KiB) Viewed 1437 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Calibration look-see!

Post by Velocomp »

Everything looks fine. Enjoy!
John Hamann
1k2go
Posts: 2
Joined: Wed Sep 04, 2013 8:59 pm

Re: Calibration look-see!

Post by 1k2go »

Thank you!
Post Reply