PP V3 in MTB calibration check

Post Reply
kdx200
Posts: 172
Joined: Sat Jan 14, 2017 10:09 am

PP V3 in MTB calibration check

Post by kdx200 »

Hi John!

As the title says, now, trying with my carbon mtb.

MTB
Blocked suspension
PPV3
Height 175cm
Weight 69k
Bike weight 12k
Wheels 26x2,20 40psi

Cal ride and 55k ride attached.

i can see in the wind annalisys that i had tailwinds aprox at km49-52 and i can remember that i felt the HEADwind instead.

Thank you very much
Attachments
iBike_12_22_2019_0713_2_km_CalRide.ibr
(50.5 KiB) Downloaded 142 times
iBike_12_22_2019_0719_54_km_HiDef.ibr
(1.43 MiB) Downloaded 141 times
Velocomp
Velocomp CEO
Posts: 7803
Joined: Fri Jan 11, 2008 8:43 am

Re: PP V3 in MTB calibration check

Post by Velocomp »

I think you are OK.

There are strong headwinds between minutes 30 to 35 and 1:35 to 1:40. There are cross winds for much of the ride headed out, and tailwinds from 1:40 to 2:05

Having done this for 15 years now, my experience is that it is difficult to judge winds while riding. I look at the ride file to see if wind speeds look reasonable; in your ride file, most certainly they are.
Attachments
Screen Shot 2019-12-22 at 6.08.15 PM.png
Screen Shot 2019-12-22 at 6.08.15 PM.png (301.78 KiB) Viewed 1379 times
John Hamann
Post Reply