Hi guys,
Sorry for the the writing but from Dutch to English...
Today i received my PowerPod Lite. I installed the device and connected the Wahoo speed and cadance sensors. After connecting my Wahoo Elemnt, i did the calibration ride and afterwards a first test ride to see what happens. With the calibration check on Isaak software , the arrow was in the green segment.
Can someone please take a look at the files if my calibration is good ?
Thanks in advance,
Freddy
Calibration Ride and first test ride
-
- Posts: 4
- Joined: Thu Oct 10, 2019 5:49 am
Calibration Ride and first test ride
- Attachments
-
- iBike_06_01_2019_0008_6_km.ibr
- (44.73 KiB) Downloaded 156 times
-
- iBike_06_01_2019_0003_2_km_CalRide.ibr
- (17.61 KiB) Downloaded 156 times
-
- Posts: 4
- Joined: Thu Oct 10, 2019 5:49 am
Re: Calibration Ride and first test ride
Thanks John for your time.
Is there any way to see the battery status from PP? On my Wahoo Elemnt I can not find.
Is there any way to see the battery status from PP? On my Wahoo Elemnt I can not find.
Re: Calibration Ride and first test ride
We send battery status information. I know it's visible on Garmin but I don't know the Wahoo system...alfredo1965 wrote: ↑Mon Oct 14, 2019 8:09 am Thanks John for your time.
Is there any way to see the battery status from PP? On my Wahoo Elemnt I can not find.
John Hamann
-
- Posts: 4
- Joined: Thu Oct 10, 2019 5:49 am
Re: Calibration Ride and first test ride
Thx John, time to ask Wahoo I think
One more question as a new PP-user,
When I analyse my ride , there is no heart rate date in the file. If I see on Strava and on my Wahoo Elemnt, the HR sensor was connected during the ride.
Do I have to pair the HR sensor seperatly from speed and cadence sensors? I looked in the instructions and the HR sensor should connect at the same time.
For details see attached file "Calibration ride PP on strava"
Thanks in advance for your answer.
Freddy
One more question as a new PP-user,
When I analyse my ride , there is no heart rate date in the file. If I see on Strava and on my Wahoo Elemnt, the HR sensor was connected during the ride.
Do I have to pair the HR sensor seperatly from speed and cadence sensors? I looked in the instructions and the HR sensor should connect at the same time.
For details see attached file "Calibration ride PP on strava"
Thanks in advance for your answer.
Freddy
- Attachments
-
- Calibration ride PP on strava.png (250.5 KiB) Viewed 2819 times
Re: Calibration Ride and first test ride
Make sure your HR strap is awake (and your speed and cadence sensors too), then do a new pairing to PP. It will find the HR sensor. You will need to do a new cal ride afterwards...
John Hamann
-
- Posts: 4
- Joined: Thu Oct 10, 2019 5:49 am
Re: Calibration Ride and first test ride
Thx John!
According other topics, i've seen that it is absolutely not necessary to connect the HR sensor to the PP for optimal registration of power. So, in previous mail you said that my Cal-ride looked great and that ride was also without HR sensor.
I think, i will leave it like it is.
I can see all data on Strava which is most important, and only 10 minutes of each ride on Isaak software, but that's normal for the PP lite version.
Have a nice day,
Freddy
According other topics, i've seen that it is absolutely not necessary to connect the HR sensor to the PP for optimal registration of power. So, in previous mail you said that my Cal-ride looked great and that ride was also without HR sensor.
I think, i will leave it like it is.
I can see all data on Strava which is most important, and only 10 minutes of each ride on Isaak software, but that's normal for the PP lite version.
Have a nice day,
Freddy