Can you check my calibration?

Post Reply
Denodan
Posts: 24
Joined: Mon May 27, 2019 1:41 am

Can you check my calibration?

Post by Denodan »

I managed to entered my correct bike weight by my scales, weighted myself; then weighed myself with bike and took off my weight and got hr strap going and works with powerpod and redid a calibration, so could you check it and see if it's ok? Near the ballpark will be fine by me?
Attachments
iBike_07_20_2018_0010_5_Miles.ibr
(68.21 KiB) Downloaded 143 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Can you check my calibration?

Post by Velocomp »

What is your bike weight and rider weight?
John Hamann
Denodan
Posts: 24
Joined: Mon May 27, 2019 1:41 am

Re: Can you check my calibration?

Post by Denodan »

63.5kg my weight, bike 15.5kg
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Can you check my calibration?

Post by Velocomp »

Denodan wrote: Sun Jun 16, 2019 3:18 pm 63.5kg my weight, bike 15.5kg
I have adjusted your profile to have to have correct bike and rider weight.

Load this corrected profile into your device:

1) Place the profile on your desktop

2) Attach device to Isaac

3) Use the Isaac command "Edit/Edit Profiles/Import" to import the attached profile into Isaac.

4) Use the Isaac command "Edit/Edit Profiles/Send to Device" to put the profile into your device
Attachments
Denodan.ibp
(412 Bytes) Downloaded 137 times
John Hamann
Denodan
Posts: 24
Joined: Mon May 27, 2019 1:41 am

Re: Can you check my calibration?

Post by Denodan »

entered my updated profile. Here my ride, but calorie count seems lower. Will i need to recalibrate? to get calories right or is it linked with power output?
Attachments
iBike_06_17_2019_0956_8_km.ibr
(58.17 KiB) Downloaded 142 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Can you check my calibration?

Post by Velocomp »

Velocomp wrote: Sun Jun 16, 2019 7:03 pm
Your wind sensor appears to be obstructed. This would cause low power.

Calories are linked to power output. Calories are power added up over time.

Your weight was too high in your original profile. It is not surprising that your power/calories dropped, but please check your wind sensor for blockage.
John Hamann
Denodan
Posts: 24
Joined: Mon May 27, 2019 1:41 am

Re: Can you check my calibration?

Post by Denodan »

I have the cables well away from the wind sensor. Seems strange as I had tied my cables back.

Thought I did put my proper weight in profile. 63.5kg? As for cables, have them away from powerpod air duct
Attachments
20190617_114928.jpg
20190617_114928.jpg (186.44 KiB) Viewed 3874 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Can you check my calibration?

Post by Velocomp »

Looks OK. Do another ride and post it.
John Hamann
Denodan
Posts: 24
Joined: Mon May 27, 2019 1:41 am

Re: Can you check my calibration?

Post by Denodan »

Here is another ride. I did tie another cable just in case, so hope this is better?
Attachments
iBike_06_17_2019_1136_3_km.ibr
(31.08 KiB) Downloaded 136 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Can you check my calibration?

Post by Velocomp »

This looks better
John Hamann
Denodan
Posts: 24
Joined: Mon May 27, 2019 1:41 am

Re: Can you check my calibration?

Post by Denodan »

Thanks for looking for me and your help. Hope you have a wonderful day.

I have ordered a front mount so I can move it out the front of the handle bars away from cables.
Post Reply