Hi John,
I read the Isaac Instructions cover-to-cover, so hopefully no more unnecessary questions!
1. Recalibrated the PP and entered the correct tire circumference and bike weight
2. I performed an O&B ride and upon completion clicked the PP button 5 times to stop.
3. Clicked the PP Button once and completed a ~40min test ride. (again I clicked the PP button 5 times to turn it off)
4. When I connect the PP to my computer and select Get Rides there are 2 available 1 x 400m ride? and 1 x 22KM ride = my 40min test ride. I was expecting to see a calibration ride?
![download ride.png](./download/file.php?id=7424&sid=99728779b88556a9727670656d28139b)
- download ride.png (18.18 KiB) Viewed 3795 times
5. I then check the 22KM ride and adjusted the CCR based on the Model/Pressure I am running. I took the data from bicylerollingresistance.com I run at 4.1 Bar as opposed to the estimated 7.48 Bar would this be the right type of adjustment for me to make?
![CCR.png](./download/file.php?id=7425&sid=99728779b88556a9727670656d28139b)
- CCR.png (70.86 KiB) Viewed 3795 times
![CCR Adjust.png](./download/file.php?id=7426&sid=99728779b88556a9727670656d28139b)
- CCR Adjust.png (39.66 KiB) Viewed 3795 times
For the most part the displayed Watts seemed logical on climbs in a medium gear 300-400Watts, however, often once I had crested the climb, changed into a high gear and was (I felt) applying alot of force on the flat the power would drop into low 100-150Watts - is this simply the PP adjusting or a delay?
Not sure if I Calibrated correctly or not?