Emparejamiento

Post Reply
Matteo
Posts: 40
Joined: Fri Nov 03, 2017 11:40 am

Emparejamiento

Post by Matteo » Fri Feb 08, 2019 10:52 am

Hola jhon
Tengo asignados dos perfiles ..uno para MTB y otro para carretera...cada vez que vuelvo a montar se enciende la luz parpadeante roja y verde ..que está ocurriendo???

Velocomp
Velocomp CEO
Posts: 5747
Joined: Fri Jan 11, 2008 9:43 am

Re: Emparejamiento

Post by Velocomp » Fri Feb 08, 2019 2:57 pm

You need to do a calibration ride for the profile that is flashing red/green.
John Hamann

Matteo
Posts: 40
Joined: Fri Nov 03, 2017 11:40 am

Re: Emparejamiento

Post by Matteo » Sat Feb 09, 2019 3:10 am

Pero ya hice un recorrido para calibrar!!!!
Tengo ya asignados dos perfiles....pero cada vez q monto en bici de nuevo al encender el PP ,potencia a cero y parpadeo verde y rojo...hay que calibrar cada vez que montas???

Velocomp
Velocomp CEO
Posts: 5747
Joined: Fri Jan 11, 2008 9:43 am

Re: Emparejamiento

Post by Velocomp » Sat Feb 09, 2019 5:00 pm

No, you do not have to calibrate every time.

Please post the profile files (.ibp) for both bikes.
John Hamann

Matteo
Posts: 40
Joined: Fri Nov 03, 2017 11:40 am

Re: Emparejamiento

Post by Matteo » Sun Feb 10, 2019 8:04 am

aqui mando los recorridos a priori con buenos resultados,....te mando lo posteriori los recorrido despues de calibracion..
Attachments
iBike_01_24_2019_0933_46_km.ibr
mtb
(377.81 KiB) Downloaded 7 times
iBike_01_19_2019_1004_50_km.ibr
road
(418.73 KiB) Downloaded 5 times

Velocomp
Velocomp CEO
Posts: 5747
Joined: Fri Jan 11, 2008 9:43 am

Re: Emparejamiento

Post by Velocomp » Sun Feb 10, 2019 9:07 am

There are 3 problems:

1) your 1/19 ride has an incorrect value of Crr. I fixed this in the attached profile

2) Your 1/24 Btt ride has incorrect values of wind scaling and CdA. I fixed this in the attached profile

3) Both profiles use the same sensor IDs. From this I assume you are moving your sensors from bike to bike. This is OK, but be aware that you will have to manually switch profiles, using Isaac, for the bike you're riding each day.

Your device might be getting confused because you are using the same IDs for both bikes.
Attachments
01_19_2019.ibp
(403 Bytes) Downloaded 6 times
BTT.ibp
(508 Bytes) Downloaded 6 times
John Hamann

Matteo
Posts: 40
Joined: Fri Nov 03, 2017 11:40 am

Re: Emparejamiento

Post by Matteo » Sun Feb 10, 2019 3:05 pm

Ok gracias
Los sensores son distintos para cada bicicleta.si te sirve de información.

Velocomp
Velocomp CEO
Posts: 5747
Joined: Fri Jan 11, 2008 9:43 am

Re: Emparejamiento

Post by Velocomp » Sun Feb 10, 2019 3:47 pm

For the two ride files you posted the speed and cadence sensor IDs are the same. Are these two ride files from the same bike?
John Hamann

Matteo
Posts: 40
Joined: Fri Nov 03, 2017 11:40 am

Re: Emparejamiento

Post by Matteo » Mon Feb 11, 2019 2:07 am

Nooo uno era de MTB y otro de road con distintos sensores...puede que al estar juntas se haya equivocado.... otra pregunta...los archivos que me as mandado que debo hacer??
Borro los míos antiguos y meto los tuyos al perfil??
Gracias.

Velocomp
Velocomp CEO
Posts: 5747
Joined: Fri Jan 11, 2008 9:43 am

Re: Emparejamiento

Post by Velocomp » Mon Feb 11, 2019 8:57 am

The two ride files you posted had different weights and wind scaling factors, suggesting they were from different bikes.

However, they had the SAME speed and cadence sensor IDs. This is not good...

I suggest you create new profiles for each bike, then make sure to pair sensors correctly (make sure your bikes are at least 100 feet apart so that you won't accidentally pick-up sensors from your other bike), then do a calibration ride for each.
John Hamann

Matteo
Posts: 40
Joined: Fri Nov 03, 2017 11:40 am

Re: Emparejamiento

Post by Matteo » Mon Feb 11, 2019 9:24 am

Ok muchas gracias

Matteo
Posts: 40
Joined: Fri Nov 03, 2017 11:40 am

Re: Emparejamiento

Post by Matteo » Sat Feb 16, 2019 12:02 pm

hola jhon!!!
te mando nueva calibracion de bici de carretera para ver si todo esta bien.
e observado que en descenso y llano los watios son altos???
gracias!!!!
https://velocompforum.com/download/file ... ew&id=5655
Attachments
iBike_02_16_2019_0934_104_km.ibr
calibarcion road
(773.57 KiB) Downloaded 12 times

Matteo
Posts: 40
Joined: Fri Nov 03, 2017 11:40 am

Re: Emparejamiento

Post by Matteo » Tue Feb 19, 2019 4:24 am

Solo me gustaría saber si está bien calibrado... por favor ayúdame!! gracias

Post Reply