Page 1 of 1
PowerStroke and VeloComp Aero
Posted: Sat Sep 28, 2024 10:02 pm
by TdeCampo
I am missing the elephant in the room!.
I have VC Aero 0.4 and I have the sampling rate for PowerStroke, however I can not find where the PowerStroke is.
Yes if I load Issac is there and works very well but the fact that even the image of PowerStroke is in VC Aero / About indicates that it should be there.
BTW VC Aero is working very well other wise.
Re: PowerStroke and VeloComp Aero
Posted: Mon Sep 30, 2024 5:57 am
by Velocomp
TdeCampo wrote: ↑Sat Sep 28, 2024 10:02 pm
I am missing the elephant in the room!.
I have VC Aero 0.4 and I have the sampling rate for PowerStroke, however I can not find where the PowerStroke is.
Yes if I load Issac is there and works very well but the fact that even the image of PowerStroke is in VC Aero / About indicates that it should be there.
BTW VC Aero is working very well other wise.
We haven't yet implemented PS in VA. It's coming but timetable is unclear...
Re: PowerStroke and VeloComp Aero
Posted: Mon Sep 30, 2024 10:30 am
by TdeCampo
John,
Thank you! It works great under Isaac, so it is not a big deal.
Re: PowerStroke and VeloComp Aero
Posted: Mon Jul 06, 2026 10:01 am
by TMWLUK
Wish to re-activate the question again for PowerStroke and VeloComp Aero. I have a PowerPod V5 with PowerStroke.
I have been analyzing my PowerStroke data on my desktop computer (Windows 10) with Isaac 5.0. I now have a laptop (Windows 11) with which I like to analyze my PP and PS data when I am away from home. I am running Velocomp Aero v1.0.41 software. However, when I "click" the PowerStroke icon to review my HiDef ibr files, I get this message.
No PowerStroke Data to display
But I have no problems viewing the PowerStroke data with the same HiDef ibr files with Isaac. Am I doing something wrong?
Re: PowerStroke and VeloComp Aero
Posted: Mon Jul 06, 2026 3:20 pm
by Velocomp
TMWLUK wrote: ↑Mon Jul 06, 2026 10:01 am
Wish to re-activate the question again for
PowerStroke and VeloComp Aero. I have a PowerPod V5 with PowerStroke.
I have been analyzing my PowerStroke data on my desktop computer (Windows 10) with Isaac 5.0. I now have a laptop (Windows 11) with which I like to analyze my PP and PS data when I am away from home. I am running Velocomp Aero v1.0.41 software. However, when I "click" the PowerStroke icon to review my HiDef ibr files, I get this message.
No PowerStroke Data to display
But I have no problems viewing the PowerStroke data with the same HiDef ibr files with Isaac. Am I doing something wrong?
PowerStroke works just fine with Velocomp Aero. If you have this message then there is no PS data in the particular ride file. If you wish you can confirm this by opening the same file in Isaac.
Make sure your cadence sensor is paired to your PowerPod. Also, in the VA "Device/Configure Device/Set Sample Rate" window, make sure PowerStroke is checked.
Re: PowerStroke and VeloComp Aero
Posted: Mon Jul 06, 2026 8:23 pm
by TMWLUK
Velocomp wrote: ↑Mon Jul 06, 2026 3:20 pm
TMWLUK wrote: ↑Mon Jul 06, 2026 10:01 am
Wish to re-activate the question again for
PowerStroke and VeloComp Aero. I have a PowerPod V5 with PowerStroke.
I have been analyzing my PowerStroke data on my desktop computer (Windows 10) with Isaac 5.0. I now have a laptop (Windows 11) with which I like to analyze my PP and PS data when I am away from home. I am running Velocomp Aero v1.0.41 software. However, when I "click" the PowerStroke icon to review my HiDef ibr files, I get this message.
No PowerStroke Data to display
But I have no problems viewing the PowerStroke data with the same HiDef ibr files with Isaac. Am I doing something wrong?
PowerStroke works just fine with Velocomp Aero. If you have this message then there is no PS data in the particular ride file. If you wish you can confirm this by opening the same file in Isaac.
Make sure your cadence sensor is paired to your PowerPod. Also, in the VA "Device/Configure Device/Set Sample Rate" window, make sure PowerStroke is checked.
Glad to hear PowerStroke works with Velocomp Aero. It must be something I missed.
The two attached ibr files' PowerStroke data worked well with Isaac 5.1.0 but when I open them in VA and tried to review the PS data, I get the
No PowerStroke Data to display message. The 2025 file was downloaded from PP with Isaac and the 2026 file was downloaded with VA.
Re: PowerStroke and VeloComp Aero
Posted: Tue Jul 07, 2026 7:21 am
by Velocomp
OOPS! Something has gone awry...
We will investigate ASAP.
Re: PowerStroke and VeloComp Aero
Posted: Tue Jul 07, 2026 8:22 pm
by Velocomp
We just released VA 1.0.42, which fixes the PS problem.
If you're using a Mac, this release also gets rid of the need to install USB drivers
Re: PowerStroke and VeloComp Aero
Posted: Wed Jul 08, 2026 5:25 pm
by TMWLUK
Thanks it works now.