AeroPod, PowerPod and Newton

After having mounted my Powerpod and pairing it with the sensors and head unit I set out for a calibration ride and I am not sure if I did it correctly. As I set out on my ride I pressed the button thinking I had just switched it on. It almost immediately started reading the calibration percentage, when it got to 50% I expected to have to stop and turn around but it just carried on increasing the percentage. After it got to 100% the light briefly flashed red/green I think then it just started giving power figures. As this is at odds with the instructions supplied I am concerned that I have done something wrong, or has the calibration process changed?

If you were riding uphill, or slowly, at the 50% point the unit would have continued.

You can post a ride file from after your cal ride and I will look at it.

Hi John,
Thanks for coming back to me so quickly, I'm not absolutely sure if I have done this right but I think I have attached the ride files, there seems to be a lot for just one short ride. Also I should have said in my original post, I did read on the DC Rainmaker test that an out and back ride was no longer needed that's why I was a bit puzzled. Having said all that the devise did seem to be reading my power OK.

I need the .ibr ride files, not the csv files

OK sorry, I hope I got it Right this time!

Your cal ride did not work properly, so I used the "Check Calibration" command to fix things.

Load the attached profile into your PP and all should be well.

Many thanks for your help with this John. Ill try and load it up as soon as I can.

Hi I think I am getting there now but I have one quick question. Is it necessary to re calibrate my PP every time I make a minor adjustment in my settings?

I'm not sure what settings you are adjusting, nor how minor they are. Please provide examples and I will let you know.

I adjusted the weight as I had estimated it at first I also altered the ftp as I didn’t notice it when setting up .