The Newton looks strong

Post Reply
Matad1974
Posts: 22
Joined: Sun Jun 13, 2021 11:44 am

The Newton looks strong

Post by Matad1974 »

Good evening, I mounted an old Newton 5 (an old friend of mine gave it to me) on a bike, I did the Calibration tour as explained in the guides and the next day I did a training with repetitions. I have never had a power meter and I wanted to sepaere if the data is correct, to me it seemed too high / good. :o :roll:
I attach the output and calibration file. Thanks to anyone who reads and feels like giving me some advice.
Excuse my English. ;)
Attachments
Newton_Ciro_24_06_2021_0708_45_km.ibr
(357.7 KiB) Downloaded 215 times
Newton_Ciro_23_06_2021_1747_6_km_CalRide.ibr
(53.66 KiB) Downloaded 201 times
210624_cal_data.ibcd4m
(395.35 KiB) Downloaded 207 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: The Newton looks strong

Post by Velocomp »

You have a very old Newton, about 9 years old!

I used the Analyze/Check Calibration feature of Isaac to correct your ride file. Watts are much more reasonable.

Corrected profile and ride file attached.
Attachments
Corr_Ciro_24_06_2021_0708_45_km.ibr
(522.44 KiB) Downloaded 196 times
Ciro.ibp
(698 Bytes) Downloaded 195 times
John Hamann
Matad1974
Posts: 22
Joined: Sun Jun 13, 2021 11:44 am

Re: The Newton looks strong

Post by Matad1974 »

First of all, thank you for your availability. So do I have to replace my profile with the one you corrected "Ciro"? Thank you
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: The Newton looks strong

Post by Velocomp »

Matad1974 wrote: Sun Jun 27, 2021 9:42 am First of all, thank you for your availability. So do I have to replace my profile with the one you corrected "Ciro"? Thank you
Yes
John Hamann
Matad1974
Posts: 22
Joined: Sun Jun 13, 2021 11:44 am

Re: The Newton looks strong

Post by Matad1974 »

tnk John, I only changed the weight from 93 kg to 89 kg and I set the Device Power Smooting on Dynamic, you are free to advise me and tell me if I'm wrong, I deleted the old profiles and I put this in place of Prof # 1, by
Attachments
Screenshot.png
Screenshot.png (234.28 KiB) Viewed 9613 times
Matad1974
Posts: 22
Joined: Sun Jun 13, 2021 11:44 am

Re: The Newton looks strong

Post by Matad1974 »

I think I will have to do the calibration again, the power is still too high.

Do you advise me to do a hard reset first?
Attachments
Newton_Ciro_01_07_2021_1810_42_km.ibr
(329.02 KiB) Downloaded 206 times
Screenshot (6).png
Screenshot (6).png (254.06 KiB) Viewed 9513 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: The Newton looks strong

Post by Velocomp »

At the 35 minute mark, either your mount changes angle or you are riding in a really bumpy patch of road.

Make sure your mount is solidly attached and can't rotate.

Also: your Newton is 9 years old. We've improved a lot since then and it's possible your unit is past its best days.
John Hamann
Post Reply