Page 1 of 1
Modification to RWS
Posted: Fri May 02, 2014 2:26 pm
by still-chasing
Just want to share with everybody what I did to my TT setup. The original tubing doesn't allow a tight bend without pinching the tube. You need at least 2inches in front of Newton to have a clean loop. Since I want to move my bottle closer to me, I modified the intake and added an "L" shape connector. Shaved the original intake just a bit and added the "L" connector. I now have a shorter extension with some room to move the bottle back. I can maybe go another 5mm shorter with a different "L" connector.
Re: Modification to RWS
Posted: Fri May 02, 2014 2:28 pm
by still-chasing
Here's another picture
Re: Modification to RWS
Posted: Fri May 02, 2014 3:30 pm
by Velocomp
Very clever!
Re: Modification to RWS
Posted: Sun May 11, 2014 1:56 am
by w01fy
Velocomp, would this adversly affect the readings?
I've been thinking about doing something similar but rather than a 90 degree like that a 180, but curved to help direct the flow.
Re: Modification to RWS
Posted: Sun May 11, 2014 8:29 am
by Velocomp
As long as you have an unblocked tube, and the remote wind port faces the opposing wind, you should be OK
Re: Modification to RWS
Posted: Thu May 22, 2014 12:11 pm
by ldmitruk
Where did you mount the intake for the RWS?
Re: Modification to RWS
Posted: Thu May 22, 2014 8:39 pm
by still-chasing
about midway underside of left handlebar