Gen III Aero - tilt and battery issues
Posted: Thu Apr 14, 2011 7:03 am
I used the Gen 3 on my trainer all winter - worked fine. Now after setting trainer mode off, and using outdoors it is behaving very strange. I thought it could be a battery issue (although the battery was only a couple of weeks old), so I put fresh batteries in everything and tried again. Same strange outcome.
1. Tilt initially read fine then goes crazy such that it is unable to calculate watts, then at the end read fine again.
2. Battery read 3.1 when I put it in (Eveready), yet a low battery reading came on after about 50 minutes. Battery read 2.82 when I finished the ride (now reads 2.89).
3. The ride was split into 2 files (on its own), yet the latter ride read as full Km in the header while reading 27km when downloading, the second file was the missing 6 km.
I tried resetting the tilt - the first day starting, and underway - still went crazy. I reset the tilt the start of the second day. Same result
I used the Gen II Aero the next day, no problems.
Is there something wrong with this Gen III?
1. Tilt initially read fine then goes crazy such that it is unable to calculate watts, then at the end read fine again.
2. Battery read 3.1 when I put it in (Eveready), yet a low battery reading came on after about 50 minutes. Battery read 2.82 when I finished the ride (now reads 2.89).
3. The ride was split into 2 files (on its own), yet the latter ride read as full Km in the header while reading 27km when downloading, the second file was the missing 6 km.
I tried resetting the tilt - the first day starting, and underway - still went crazy. I reset the tilt the start of the second day. Same result
I used the Gen II Aero the next day, no problems.
Is there something wrong with this Gen III?