New AeroPod/PowerPod CdA app for Garmin devices

[Matad1974]

Oleksiy,

Many thanks for your great app. I have been using it with 2 fields using the AP as power meter, I ride about 300 miles a week

Problem: during a ride sometimes may be a very short interruption of the data (like radar disconnect and almost immediately reconnected) and everything continuous running well except the CdA app that freezes.

How to solve it:
Turn off and on the garmin OR just replace the CdA field in the data screen with any other one, then put back the CdA app and runs well again.
Here a way also to reproduce the problem"
1. wake up the sensors
2. Turn on the AP
3. Turn on the Garmin
4. Go the Data Sceen where the 2 field CdA is
5. Lift bike and rotate wheel and the numbers change.
6. Go for coffee and allow the garmin to fall sleep
7 Come back, rotate the wheel , speed moves, power shows but the CdA app 2 fields is frozen.

ref:
Garmin 830
Software Version: 7.10

Connected IQ | Apps
-Notifications
-Controls
-Weahter
-Segment Explore
-Light
-Ride Ratios
-Ride with GPS
- AeroPod CdA
-Stopwatch

I'll be glad to provide any additional data that you need or test anything that may help you.

-=terry=-

I'll try this .. thanks

[Lopey66]

Hi all,
just noticed a new version 1.1.16 Updated: October 15, 2021
https://apps.garmin.com/en-US/apps/f542 ... 3504b1e2#0

[lorduintah]

Looks like the option to turn off displaying in the Garmin screens ---

CDA and Time Advantage portions of AP functions ---

Font size change

should be useful for the PP users because these are not used in the PP.

[Rembert]

Suddenly the app stopped working. That is the display (2 fields) always shows -1,1% slope and 0 wind no matter what. How would I "reset" app/device?
Garmin Edge 530, PPv4, latest firmware

note: my ride shows wind/slope data in Isaac, only the display on garmin edge wont show data

Cheers

[Velocomp]

Turn off your Garmin, then turn it back on. Hopefully that will fix things.

[Rembert]

Turned off the sensor in garmin settings and then back on. Wind and tilt values reappeared. Only the power output suddenly showed zero. On/off did not change anything. Next I forced recal of PP by reconnecting sensors. After that all values showed plausible data. Hope this does not happen to often...

[Velocomp]

FWIW, it has not happened to me in 5 years...

[lschaffer]

For me the CDA app from Oleksiy does not work

Powerpod V5
Garmin 1030 plus
Latest Garmin firmware and IQ Version
Latest CDa app from Oleksiy

The slope/wind widgets has been added to a screen

I have followed the instructions.

Speed sensor on, PP on, Garmin on.
Power watts are displayed correctly

Slope/wind show only ---

I tried to remove the widget, reinstall Garmin IQ and the app again.

Does this version compatible with the latest Garmin firmware?

[Velocomp]

For me the CDA app from Oleksiy does not work

Powerpod V5
Garmin 1030 plus
Latest Garmin firmware and IQ Version
Latest CDa app from Oleksiy

The slope/wind widgets has been added to a screen

I have followed the instructions.

Speed sensor on, PP on, Garmin on.
Power watts are displayed correctly

Slope/wind show only ---

I tried to remove the widget, reinstall Garmin IQ and the app again.

Does this version compatible with the latest Garmin firmware?

Yes, the AeroPod CdA app is compatible and should work.

Delete the app from your Garmin, then reinstall the app.

[lschaffer]

Thanks after reinstall the app and the data segments too it has worked!
Just one question yet, the negative wind is tail or head?

[Velocomp]

Negative is tail wind. When wind is positive it is opposing you more, so that is a headwind.

[lschaffer]

Thanks for the support

[lschaffer]

Once again, since yesterday the app does not show slope and wind data. It started as earlier (PP then Garmin) . I removed the data segment from the screen and put it again back, did not help. In the Garmin Connect the slope and wind data is missing also (for a day it has worked yet)
Should I remove the app itself and reinstall?
It is possible that the PP cannot send slope and wind data to the Garmin?

[Velocomp]

Once again, since yesterday the app does not show slope and wind data. It started as earlier (PP then Garmin) . I removed the data segment from the screen and put it again back, did not help. In the Garmin Connect the slope and wind data is missing also (for a day it has worked yet)
Should I remove the app itself and reinstall?
It is possible that the PP cannot send slope and wind data to the Garmin?

PP transmits slope and wind data constantly, in the same way it transmits power data. It isn't something that turns on and off.

Your Garmin receives this data and displays it. When you say that you don't see slope and wind data, I'm assuming that you DO see the CdA field, and see --- for the slope and wind fields. Is this correct?

If so, the problem is with your Garmin. I would uninstall and then reinstall the app.

[lschaffer]

I have the PP V5 so the CDA fields in the app by Oleksiy have been switched off, for some days the wind and slope data have been displayed in the Garmin screen, yesterday not. Ok I will remove and reinstall the app in the Garmin 1030 plus again

[smhagger]

Hi guys,

New here-actually a previous iBike / iPro user that moved on to DFPM's years ago-and am considering buying a PP V5 or AP V5 to use with my Garmin Edge 830, this new Connect IQ app, and my DFPM.

Question: I don't have experience connecting both a DFPM and AP or PP to my Garmin at the same time. I would like to continue to get my power data from my DFPM (Garmin Vector 3 or Quarq PM), but pull in the slope and wind data from the PP. Can I do that (have the power that's displayed/recorded come from my DFPM while connected to the PP)?

I just want to make sure that I am able to do what I want before pulling the trigger on a PP or AP. Yes, I'm essentially buying the PP/AP for just the accurate slope, the wind data, and logging those values along with my ride. I'm to the point of wanting to do that vs using a much less accurate barometric pressure based 'grade' data field that Garmin provides.

Thanks in advance!

[Velocomp]

Hi guys,

New here-actually a previous iBike / iPro user that moved on to DFPM's years ago-and am considering buying a PP V5 or AP V5 to use with my Garmin Edge 830, this new Connect IQ app, and my DFPM.

Question: I don't have experience connecting both a DFPM and AP or PP to my Garmin at the same time. I would like to continue to get my power data from my DFPM (Garmin Vector 3 or Quarq PM), but pull in the slope and wind data from the PP. Can I do that (have the power that's displayed/recorded come from my DFPM while connected to the PP)?

I just want to make sure that I am able to do what I want before pulling the trigger on a PP or AP. Yes, I'm essentially buying the PP/AP for just the accurate slope, the wind data, and logging those values along with my ride. I'm to the point of wanting to do that vs using a much less accurate barometric pressure based 'grade' data field that Garmin provides.

Thanks in advance!

Yes, our ConnectIQ app allows you to display slope, wind, and DFPM power data. And yes, PP slope data is MUCH more accurate

[smhagger]

Thanks John! Now to decide whether to go with the PP or AP unit. Not sure which one to choose. I'm mainly a road cyclist, that rides road and gravel. No TT's or triathlons for me.

[Velocomp]

Thanks John! Now to decide whether to go with the PP or AP unit. Not sure which one to choose. I'm mainly a road cyclist, that rides road and gravel. No TT's or triathlons for me.

You already have a DFPM, so if you can spring for the extra $100 I would suggest an AP. It really is interesting/fun to explore the world of aerodynamics. I'm not a TT or tri guy either, but I have learned some useful things about what combinations of clothing and ride position make my riding easier (or harder...).

[smhagger]

Sounds good-I just placed an order for the AP. I can use the Isaac software with the unit as well? Looking forward to getting re-acquinted with it and taking a look at the insights related to my CdA information (should be interesting, being a small guy and all).

[Velocomp]

Sounds good-I just placed an order for the AP. I can use the Isaac software with the unit as well? Looking forward to getting re-acquinted with it and taking a look at the insights related to my CdA information (should be interesting, being a small guy and all).

Yes, Isaac is available. If you're using a Mac there are weird issues. Make sure to read the installation instructions carefully.