Page 1 of 1

Comprehensive Instructions for PowerPod V5, V4, V3, V2, and PowerPod

Posted: Fri Apr 26, 2019 6:14 pm
by Velocomp
NOTE: IN ILLUSTRATED DIRECTIONS, POWERPOD V5-V3 (HORIZONTAL ORIENTATION), OR POWERPOD V2 (VERTICAL ORIENTATION) MAY BE SHOWN.

NOTE: there is a different link for Comprehensive PowerPod Lite Instructions

https://velocompforum.com/viewtopic.php?f=12&t=5081

Below instructions are for PowerPod V5/V4/V3, and PowerPodV2/PowerPod models

NOTE: SOME ILLUSTRATIONS SHOW POWERPOD V2; POWERPOD V5-V3 LOOKS DIFFERENT, BUT V5-V3 SETUP AND CALIBRATION ARE THE SAME.

0. PowerPod V5-V3 Basic Installation Instructions
PowerPod V5-V3 Instructions summary.pdf
(2.56 MiB) Downloaded 1389 times
1. PowerPod and PowerPod V2 Basic Installation Instructions
PP V2_EN__080519.pdf
(3.24 MiB) Downloaded 516 times
2. Out and back calibration procedure
PP O&B 6.41+070919.pdf
(2.83 MiB) Downloaded 3375 times
3. Tips and Troubleshooting
PowerPod Troubleshooting6.40+.pdf
(515.35 KiB) Downloaded 2600 times
4. PowerPod status light table
POWERPOD STATUS LIGHT.pdf
(55.16 KiB) Downloaded 1799 times
5. Isaac software installation instructions

MACINTOSH: http://www.velocompforum.com/viewtopic.php?f=35&t=5868

WINDOWS:
Isaac Win SW Installation042822.pdf
(242.29 KiB) Downloaded 289 times
6. Isaac software usage instructions

https://bit.ly/3H3iXLe

7. Video: how to do out-and-back calibration ride and setup up device with Isaac software

https://www.youtube.com/watch?v=--lDv-ecQSM

8. GPS Tracker Instructions
GPS Tracker Instructions100818_red.pdf
(792.94 KiB) Downloaded 1088 times
9. PowerStroke Instructions
PowerStrokeInstructions100718_red.pdf
(542 KiB) Downloaded 1044 times
10. Video: how to use Isaac software to analyze and correct PowerPod settings

https://www.youtube.com/watch?v=5unDDFWWQaw

11. Warranty
Warranty081519.pdf
(123.88 KiB) Downloaded 1038 times

12. HOW TO DISPLAY SLOPE AND WIND SPEED DISPLAY FOR POWERPOD V5-V3 UNITS ONLY ON GARMIN BIKE COMPUTERS.

https://velocompforum.com/viewtopic.php?f=12&t=5517