How to Change Profiles in your PowerPod

Post Reply
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

How to Change Profiles in your PowerPod

Post by Velocomp »

If you want to use more than one of the four profiles available in your PowerPod, you will need to change profiles using Isaac software.

Here's how to change profiles:

1) Attach your PowerPod to Isaac software

2) Go to "Device/Set Active Profile in Device..."
Screen Shot 2017-04-01 at 7.36.49 AM.png
Screen Shot 2017-04-01 at 7.36.49 AM.png (94.69 KiB) Viewed 3203 times
3) A popup window will appear, showing you which profile is currently active (in this example, Profile 1)
Screen Shot 2017-04-01 at 7.32.12 AM.png
Screen Shot 2017-04-01 at 7.32.12 AM.png (46.17 KiB) Viewed 3203 times
4) Click the Radio Button to the left of the profile you want to be active (in this example, Profile 3)
Screen Shot 2017-04-01 at 7.33.02 AM.png
Screen Shot 2017-04-01 at 7.33.02 AM.png (54.23 KiB) Viewed 3203 times
5) Click the "Send to Device" button
Screen Shot 2017-04-01 at 7.33.45 AM.png
Screen Shot 2017-04-01 at 7.33.45 AM.png (12.4 KiB) Viewed 3203 times
The profile you have selected will now be active in your PowerPod
John Hamann
Post Reply