AeroPod, PowerPod and Newton

Thank you, John.
I'm amazed , how I've become so dependent on this unit. I'll leave PROFILE 4 blank.

Ken B

Thanks John, See post {. Re: HELP ! I broke my PowerPod. Really Post by Kcblair » Tue Aug 25, 2020 4:50 pm Hello John, Tom got to my broken PP v2. After a conversation, I discovered my circuit board was the current model . Tom offered to upgrade it to v3 and put it into a v3 shell. A little reluctan...

Hello John, Now I'm confused. I have an unlock key, to be able to load 4 bike profiles. So, now I can only use 2 ? I have no use for the DFPM, will never use that function . I don't need Cda, either . I have 5 bikes, with 1-3 presently assigned and profile 4 is swapped between 2 bikes . What's the p...

Hello John. I have had an occurrence, twice in the last 4 weeks, Same bike , same sensors . On those occasions, i stopped for a short break , maybe 4-5 mins. When I start , I notice the power numbers climb above , what is normal. I get to a point, where I can stop, turn off the PP and restart , all ...

Thanks John, That explains why it was full , this early in the season. I'll have to check more often . Everything I needed was in GarminConnect, too. KB.

Hello John. PP be working great. Question, how much data or ride data is stored in the PP v3/4 ?

Thanks,

Ken B.

Thanks John, I didn't think I would be the only cyclist with fewer than 4 bikes . Well, stick it on the back burner KB.

Hello John,

Are there any plans to increase the number of profiles to PPv3 , in the future ?

Thanks.

Hello John. Did some testing this morning, removing all batts, checking 1 speed sensor at a time , all worked but the i I had issues with yesterday. So, I deleted the profile from Isaac, and reinstalled the backup profile, it works ! No Idea , how a profile can go faulty, just sitting in PP, or for...

Hello John. Did some testing this morning, removing all batts, checking 1 speed sensor at a time , all worked but the i I had issues with yesterday. So, I deleted the profile from Isaac, and reinstalled the backup profile, it works ! No Idea , how a profile can go faulty, just sitting in PP, or for ...

Thanks John, email sent.

Ken B.

Winter Check, PP not recognizing Speed Sensor Post by Kcblair » Wed Feb 10, 2021 12:22 pm Hello John, Hope you all are staying safe down there. Was testing my equipment, Garman and PP , on one bike. Fresh battery in wheel sensor and Garmin reads the speed sensor, for some reason the PP does not. PP ...

Thank you John, Looks like something I might be interested in. KB

I don't find much in the Isaac instructions, pertaining to the watts lost in my ride data. How do I use this info ? Or is this part of the Power Stroke software, which I don't have ?

Thank you, John.

Ken B.

Nice , learn something new. Mine says: New.

Thanks John, sounds easy enough .

Ken B.

I've purchased 3 different brands of K Edge mounts with Gropro mounts and the PP fits them all. KB

Hello John, I use the same cadence and HR sensor on all bikes. After recalibration, , some profiles did not get the HR and/or HR sensor paired. So I added the ID and type, resent the profile to the PP. Is there a way to enable those sensors, without having to re-pair and cause a calibration ride ? I...

Hello John,

Finally got all 5 bikes profiled and reading correctly. What a nice little unit, v3 is........

Thank you, John. I started subsequent rides in a shaded area, so no missing reading the lights. Bikes 2 & 3 went without issues. Now on to 4 & 5.

PS. I'm liking that kool Aeropod cda app. Nice work.

Ken B.
EDIT: Bike 4 complete.

Just complete cal on 2nd bike, everything worked as described. First cal , wasn't sure about pushing button, and blinking light hard to see, compared to v2.

Now onto 3rd bike.

Third bike cal went to plan.

No. 4 & 5 for another day KB

Same thing with steps 4c to 7. But I did a cal ride, when extracted to Isaac. KB

OK, got some interesting results . Not sure about O&B ride. It started out yellow, then to red/green. Not sure if I saw the blinking yellow, as not sure about the function button. Push in or down front top. As I was riding to my start point, I noticed the power numbers going 1- up. Reached 50 an...

Thanks John, that's what I wanted to hear. At age 73, if it ain't easy, I'm out. Been riding for over 50 yrs. this power stuff is the coolest. Even installed the nifty Aeropod app. Now I've got more data, than a space shuttle to look at. Hope I don't end up in the gutter.

Okay, the Powerpodv3 just arrived, that was fast. I placed 1 PROFILE into the PP. Synched with sensors and Garmin. I get a solid yellow light, which means it needs a calibration ride. So far so good, but, it's raining, have to wait til tomorrow. Hopefully, I'm on the right course. When recal is comp...

From memory you just need to copy the profiles onto your PP3 from Issac. You will then need to do a calibration ride as I think the wind settings are slightly different in particular if you have a pitot tube fitted. In theory should also find sensors, as nothing has changed, if I copy those profile...

Thanks, I'm hoping it's that easy. Tom told me that the cda and wind sensor are different. And a new cal ride is needed , so in theory the recal ride should adjust those. KB

Hello John, As I wait for my upgraded PP, how would I merge the new calibration with my rider data that is already in Isaac , under "edit Profiles" page ? Each bike will have the same speed sensor. All over data, bike weight, rider weight, positon, tires, etc . won't change . Thank you, Ke...

Ok, Thanks John. Can't wait for my PPv3 to get her.Ken B

Hello John, Tom got to my broken PP v2. After a conversation, I discovered my circuit board was the current model . Tom offered to upgrade it to v3 and put it into a v3 shell. A little reluctant at first , I decided to go for it. I do understand , that I will have to perform a recal on all 5 bikes, ...