AeroPod, PowerPod and Newton

Again double check powerpod ble pair with garmin 1040 by ant+. Already do what you say garmin express double check aeropod app install and ready garmin IQ on garmin 1040. Double check powerpod ble have last firmware. Double check all my sensor’s even HRM are pair and properly with powerpod and worki...

Your Garmin should see the HRM - you can in searching for sensors select just HRM and the Garmin will isolate to finding your heart monitor - if you are wearing it. You might want to consider taking your Garmin and deleting all sensors that are paired - the start pairing them again - including your...

Pair my powerpod ble with garmin on any+, success transmit, cadence, speed, DFPM power, I just need to pair my HRM and powerpod and that’s it, but not luck transmit for AERPOD APP, I have my powerpod ble pair by ant+.
Any clue please.

If you have a DFPM paired to your PowerPod, then the power transmitted by PowerPod to the Garmin is from your DFPM. There is no adjustment you need to make. It work like a charm! I just need to pair my HRM and powerpod and that’s it, but not luck transmit for AERPOD APP, I have my powerpod ble pair...

As I say before MY POWERPOD BLE it’s already paired over ANT+ to my garmin. The problem was you can’t have 2 powermeters simultaneously CONNECTED ON and garmin device. So I erase everything and just pair powerpod. That successfully pair POWERPOD over ANT+ to garmin, I already see relay data like SPE...

Hi guys, New here-actually a previous iBike / iPro user that moved on to DFPM's years ago-and am considering buying a PP V5 or AP V5 to use with my Garmin Edge 830, this new Connect IQ app, and my DFPM. Question: I don't have experience connecting both a DFPM and AP or PP to my Garmin at the same t...

Ok, Not luck for transmit data. But Very lucky to pair powerpod ANT+ with garmin, I erase all my sensors and it work to see powered and its NUMBER ID 10508. Pair with Garmin and transmit - relay - cadence - speed - Power. Conclusion on this one, Garmin don't accept to connect TWO (2) PowerMeters at ...

My garmin 1040 don’t see powerpod as ANT+.
Let check what I can do.
I have several device connected to powerpod, maybe something to concern?
SPEED
CADENCE
HRM
DFPM
I will do a video and post it over here and back later.
Thanks.

i trying to “stream-broadcast” powerpod BlE wind data, CDA, and etc info to my garmin 1040 with AEROPOD 2.0 app but “ DONT SEE” my powerpod BlE data. I pair my powerpod with my garmin 1040 for Bluetooth because garmin don’t see powerpod over ANT+. It’s my powerpod BLE compatible for bradcast that da...

Thank you for your time.

What I gain?

I COULD DO THE OUT AND BACK PROCEDURES TO ALL MY BIKES WITH THE POWERPOD 2.

Thank you for your help.

Now I want to make it work with powerpod and garmin for metrics and garmin connect.

And gain accuracy.

No more post here thank you.

today powerpod numbers below DFPW.
PowerPod2 Profile 1 Stmpjumper Fork LOCKED.
How to gain accuracy.
The final question it’s, that it’s the power it’s no accurate.
WINDS SLOPE AND OTHER VARIABLES ARE PRECICE.

This is the bike

DogmaF8 Profile3
What could be wrong the numbers agains DFPM are high.
How to gain accuracy?

My camber MTB bike have 2 suspension front fork and rear.


So that I can use powerpod in road bike as CDA MESSURE with my Garmin 1030?
How it’s the procedure to do that?

What about road dogma65 accuarate versus DFPM?

Thank you.

Already done.

thank you.

Have a good one I double check it the fork was blocked.
PP 2 mountain bike’s
PP 1 road bike’s

PP2
PROFILE 1 STUMPJUMPER MTB
PROFILE 2 CAMBER MTB

This was record on Profile 2 CAMBER MTB

PHOTOS:

I will get any help from you?
I never bought a device that in seven 7 years don’t work properly even from the start.
The lack of support for final user more than manual and some users videos, do you has to have more xplanatory content.

another ride PP2 profile 2 camber either share you my garmin with my dfpm file .fit
now the powerpod its recording but my ride was 1 hour and just record 40 minutes.

i going out today to ride on my camber PP2 Profike 2.
the powerpod record something.
here are the files.
xtrage the PP just record 1 hour but my ride was 2.

I would get any further assistance please.

Post Profile 3 and 4

I never never use profile 3 and 4.
I will post it later.
Bought are empty, and the forum just let me upload 3 files per post.

hello i got it.

PP2 profile2
PP2 profile1

1. Yes 2 PP, the number one if you see pictures on my road bikes. This PP never allow me download files. The number 2 are for my MTB Bikes, a Stumpjumper and a Camber, all files come from it. 2 those two file are from PP2 bought from stumjumper and Camber. 3. no i could load the file for my unit PP2...

I go out to the bike park, and wipe all bought two PP.
And star again.
I bring 3 of my bikes 2 MTB PP 2.
And my road bike Pinareello F8 PP 1.

Looks de PP2 record ok.
PP 1 don’t record nothing.

I didn’t see your message before.

I find some files on my powerpod2 stumjumper

First thing I need to do it right my my O&B right.
Really want to make this thing really work.
Second maybe I can offer send my two units and have a for the +5 gen aeropod, maybe better way to do the things.

How I can do Ride files if it never go further than OUT AND BACK process? all the 2 are wipe out and be in a loop of the O&B process again again again.
boutght do the process to 50 DONT STOP and jump to 52, go 100 and start again.
thank you.

thank you its there any chance to make this more dynamic?

POWERPOD 1 ROAD DOGMA