Search found 70 matches

by TriBike
Wed Oct 22, 2014 1:54 pm
Forum: Wireless Troubleshooting
Topic: Mewton not finding ibike Hrt strap
Replies: 7
Views: 14227

Re: Mewton not finding ibike Hrt strap

Try resetting the HR Strap, by reversing the battery in the strap for about 10-15 seconds. Place the battery back into the strap in its proper orientation, then put the HR Strap on. Force a sensor scan with the Newton, by pressing/holding both the {UP} and {DOWN} arrows of the Newton simultaneously,...
by TriBike
Tue Apr 15, 2014 8:09 am
Forum: Isaac software
Topic: Software Won't Connect with Unit
Replies: 7
Views: 6362

Re: Software Won't Connect with Unit

There are a few things to check if your unit is not connecting to the software. Often times, a re-boot of the computer running the Isaac software can help, as well as a Hard Reset of the Newton. I recommend also trying a different USB/Micro USB cable (most Android phones use this same cable). Be sur...
by TriBike
Tue Nov 05, 2013 11:55 am
Forum: Newton Setup
Topic: Repeat Profile following Stem change
Replies: 1
Views: 3118

Re: Repeat Profile following Stem change

Since nothing has changed with the weight of the bicycle, and it is just a change in the mounting of the Newton, I think you will be fine just doing a new Cal Ride procedure.
by TriBike
Wed Oct 16, 2013 12:11 pm
Forum: Newton Setup
Topic: I keep breaking Newton mounts
Replies: 6
Views: 5331

Re: I keep breaking Newton mounts

I had my first mount break - cracked at the underside by the screws. Second mount is holding up fie. I did a careful uniform tightening and then backed off each screw by a quarter turn. Biggest thing I don't like is the non-stainless steel screws - they RUST and look bad. I have had other riders co...
by TriBike
Fri Sep 20, 2013 7:13 am
Forum: Frequently Asked Questions
Topic: cal ride
Replies: 1
Views: 3477

Re: cal ride

Once you calibrate the Newton, you should not need another calibration unless you change the computers position on the bike, or make any drastic change to ride position or bike geometry. We have not had any issues to date, with dirt clogging the windport, however, I suspect some occasional visual in...
by TriBike
Tue Sep 17, 2013 12:08 pm
Forum: Trainers and Rollers
Topic: Necesito curva de potencia para el Elite Travel Fluid
Replies: 9
Views: 10380

Re: Necesito curva de potencia para el Elite Travel Fluid

Sí, si parece estar funcionando, entonces eso es bueno. Los valores introducidos parecen muy razonables. Estoy seguro de que usted tiene que corregir, sobre todo si sus valores se sienten como lo hacen en la carretera.
by TriBike
Tue Sep 17, 2013 9:41 am
Forum: Trainers and Rollers
Topic: Necesito curva de potencia para el Elite Travel Fluid
Replies: 9
Views: 10380

Re: Necesito curva de potencia para el Elite Travel Fluid

¿Cómo ha sido esta curva de potencia trabaja para usted? Suena muy razonable en cuanto a velocidad contra el poder. Voy a ver si podemos hacer que esta cargado en el software de Isaac. Gracias.
by TriBike
Fri Sep 13, 2013 7:44 am
Forum: Trainers and Rollers
Topic: Necesito curva de potencia para el Elite Travel Fluid
Replies: 9
Views: 10380

Re: Necesito curva de potencia para el Elite Travel Fluid

En Isaac, si vas a DISPOSITIVO -> Editar configuración Trainer -> Coeficientes ... Usted verá un "?" A la derecha, haga clic en el signo "?" y verá cómo realizar la prueba para establecer la curva de potencia ... Creo que vamos a necesitar ese archivo paseo con el fin de consegui...
by TriBike
Thu Sep 12, 2013 4:15 pm
Forum: Trainers and Rollers
Topic: Necesito curva de potencia para el Elite Travel Fluid
Replies: 9
Views: 10380

Re: Necesito curva de potencia para el Elite Travel Fluid

No estoy seguro de la curva de potencia para eso, o incluso qué consejo que darte. ¿Ha intentado utilizar la barra deslizante de ajuste potencia al configurar el perfil de entrenador?
by TriBike
Thu Aug 29, 2013 10:58 am
Forum: Newton Technical Support
Topic: '14 data error' message
Replies: 5
Views: 5346

Re: '14 data error' message

Please contact Tom from iBike. He will help you get up and running.
tgore@velocomp.com
by TriBike
Wed Aug 07, 2013 12:37 pm
Forum: Newton Technical Support
Topic: '14 data error' message
Replies: 5
Views: 5346

Re: '14 data error' message

Please email Technicalsupport@velocomp.com directly regarding this issue. Thanks
by TriBike
Wed Jul 31, 2013 3:53 pm
Forum: General Discussion
Topic: Suavizar los datos de potencia
Replies: 9
Views: 6739

Re: Suavizar los datos de potencia

Si te refieres a la iBike Newton, entonces sí. Usted puede, en el modo de configuración, "SET FILT". Recomiendo 5 segundos. Creo que la medición defualt se establece en 3 segundos. Sin embargo, puede que incluso a gustar más a los 10 segundos, sin embargo, creo que 5 es el mejor entorno pe...
by TriBike
Wed Jul 31, 2013 3:48 pm
Forum: General Discussion
Topic: ¿Puedo cambiar la información en pantalla?
Replies: 4
Views: 4117

Re: ¿Puedo cambiar la información en pantalla?

Por desgracia, eso no es una opción que tenemos en esta unidad. El método que te dije anteriormente es la mejor solución que pueda ofrecer.
by TriBike
Tue Jul 30, 2013 12:04 pm
Forum: General Discussion
Topic: ¿Puedo cambiar la información en pantalla?
Replies: 4
Views: 4117

Re: ¿Puedo cambiar la información en pantalla?

No obstante, si se pone la unidad en modo "Auto Hill", la velocidad y la pendiente se alternarán. Para ello, presione y mantenga presionado el botón "DOWN" Flecha de Hill-viento en el Newton durante unos 2 segundos. Usted todavía tiene la potencia aparece en el centro, y la caden...
by TriBike
Wed Jul 17, 2013 1:17 pm
Forum: Triathlon and TT Topics
Topic: Race with a disc
Replies: 20
Views: 26931

Re: Race with a disc

Here is a quick photo of a chart that I use as a reference:
by TriBike
Tue Jul 16, 2013 11:11 am
Forum: Triathlon and TT Topics
Topic: Race with a disc
Replies: 20
Views: 26931

Re: Race with a disc

Riding Steady for triathletes has been viewed from many angles. Hunter Allen and Crew at Training peaks have come up with some terms and figures that prove quite helpful. Let me see if I can be somewhat brief about it, and I apologize if I miss anything... It is a forum, so please all feel free to a...
by TriBike
Mon Jul 15, 2013 1:48 pm
Forum: Isaac software
Topic: 2.1.5 Does not show device menu
Replies: 2
Views: 3161

Re: 2.1.5 Does not show device menu

In Isaac, Go to VIEW-->MENUS-->DEVICE... and make sure that the Newton is selected. Also, in View, I recommend selecting Menu--> Advanced.
by TriBike
Thu Jul 11, 2013 1:15 pm
Forum: Newton Setup
Topic: Calibration
Replies: 23
Views: 17374

Re: Calibration

Also, your tilt will not display perfectly unless you are on the bike as well. Part of the cal ride does fine tune the tilt. When you sit on the saddle, it loads the rear wheel, enough to change your tilt that -0.3 or -0.2 which you are seeing. Your profile looks good. Stick with it.
by TriBike
Wed Jul 10, 2013 11:34 am
Forum: Newton Setup
Topic: Calibration
Replies: 23
Views: 17374

Re: Calibration

Can you please post a photo of how the unit is mounted? I see this cal ride from 07/02/13, and it appears that the data is fine. I would recommend leaving this profile in your iBike unit and training with it. I have a feeling if your tilt data is erratic, it may have to do with the position of the u...
by TriBike
Wed Jul 03, 2013 2:01 pm
Forum: Triathlon and TT Topics
Topic: RWS Modification Question
Replies: 12
Views: 21508

Re: RWS Modification Question

[quote="andrep"]Hi, I created my own RWS-System and like to ask you some questions about it (have a look at the pictures below) 1. Why don´t you offer a special tool to install the RWS (for example between the handlebars ... ) Not every rider would benefit from this, some, such as myself, ...
by TriBike
Wed May 15, 2013 2:29 pm
Forum: iBike Dash + Power
Topic: iBike Dash+Power end of Life
Replies: 6
Views: 12539

Re: iBike Dash+Power end of Life

No super glue, a replacement is in order. I could not find the latch in my search for the pieces. Also I would not trust the waterproofing after this. Just so you know, If your electronics in that unit are still in working order, Velocomp can re-case that unit in New Plastics for $69 + Shipping. We...
by TriBike
Thu Apr 18, 2013 10:42 am
Forum: iBike Dash + Power
Topic: Follow Up: Iphone 5 iBike Dash+Power Compatability
Replies: 4
Views: 9500

Re: Follow Up: Iphone 5 iBike Dash+Power Compatability

Jeff, please email me at: tgore@velocomp.com regarding this. Thanks
by TriBike
Mon Apr 15, 2013 1:36 pm
Forum: Newton Technical Support
Topic: Profile for a Cyclocross bike?!?!?
Replies: 9
Views: 7217

Re: Profile for a Cyclocross bike?!?!?

Hello, We now have some pretty advanced features in the Isaac software to allow you to "Check Calibration." If you do a short 4-5mi out and back ride, (not a cal ride) same road, no drafting.. (basically the same parameters as the cal ride). If you load this file to Isaac, go to: ANALYZE--...
by TriBike
Tue Feb 19, 2013 10:49 am
Forum: iBike Dash plans 2012
Topic: Strava upload issues
Replies: 10
Views: 49930

Re: Strava upload issues

Make sure that you are logged into Strava from the PowerHouse app. Go into the Settings of the PowerHouse app, and scroll down to Strava.
by TriBike
Sun Dec 23, 2012 9:52 am
Forum: iBike Features
Topic: Using a second bike
Replies: 2
Views: 3968

Re: Using a second bike

Go into the SetUp mode of the Newton, and select a new profile, then connect the Newton to the Isaac software and go to DEVICE-->SETUP DEVICE. Follow all of the steps you performed for the initial setup, with the second profile. You can save this profile in Isaac, however, the data will also be stor...
by TriBike
Tue Dec 11, 2012 2:19 pm
Forum: Newton General Questions
Topic: Garmin compatability
Replies: 3
Views: 4589

Re: Garmin compatability

The data can be sent directly to the Garmin as long as the Newton or Newton+ has the GT Firmware installed. This firmware can always be added post purchase, or if you are ordering the device directly from iBike, they will load the Firmware before sending. You can always export the file from the Isaa...
by TriBike
Thu Nov 29, 2012 12:02 pm
Forum: Triathlon and TT Topics
Topic: iAero and Garmin 310XT
Replies: 8
Views: 18346

Re: iAero and Garmin 310XT

It is also necessary to run a scan for sensors on the iAero, in order to get the P out function to work. What I would recommend, is doing a hard reset of the iBike, by reversing the battery in the unit for about 10 seconds. After you do this, be sure that the unit is on the mount, and scan for the s...
by TriBike
Wed Nov 28, 2012 10:24 am
Forum: Newton General Questions
Topic: Cold Weather - iBike Freezing
Replies: 1
Views: 3181

Re: Cold Weather - iBike Freezing

Nathan, Please contact tgore@velocomp.com regarding this issue. Thank You
by TriBike
Tue Nov 27, 2012 1:14 pm
Forum: Newton General Questions
Topic: Trainer Compatibility Newton +
Replies: 1
Views: 3041

Re: Trainer Compatibility Newton +

The list is contained in the iBike Software. You can go to DEVICE-->EDIT TRAINER SETTINGS. The JetBlack Z1 Fluid Hydrogel is one of our supported trainers.
by TriBike
Fri Nov 02, 2012 12:41 pm
Forum: Newton Technical Support
Topic: Cadence sensor all of a sudden not being found
Replies: 7
Views: 6484

Re: Cadence sensor all of a sudden not being found

When re-setting the sensor(by reversing the battery) it will change the code, that is why you see the new wireless ID's. Also, be sure that you have that cadence magnet as close as you can get it to the sensor, without touching. I can barely see light through the space of mine. If this doesn't solve...