Page 1 of 1
LONG ROUTE MTB POWER CHECK
Posted: Sun May 24, 2020 5:12 pm
by ANGEL T
Hello:
See if you can check if the watts on this route are correct. On the steepest and most rocky climbs, I think it had low watts. Attached screen to check if the data is correct.
The mtb bicycle weighs 12.70 kilograms, with 29'x2.10 wheels and 1.80 bar pressure
I weigh 68.50 kilograms and measure 178 cm.
Thanks and best regards
Re: LONG ROUTE MTB POWER CHECK
Posted: Sun May 24, 2020 5:14 pm
by ANGEL T
Attached path file, I had forgotten
Re: LONG ROUTE MTB POWER CHECK
Posted: Tue May 26, 2020 1:50 pm
by Velocomp
I think you're OK.
I picked out a section on a steep climb and used Aerocoach to check things.
http://www.aerocoach.com.au/power-from-speed/
Re: LONG ROUTE MTB POWER CHECK
Posted: Fri May 29, 2020 7:04 am
by dthom3uk
Hi John,
I'm in the process for setting up my Powerpod on my mountain bike. Once the calibration ride is done are there any recommended settings that should be altered such as the cda?
Thanks.
Re: LONG ROUTE MTB POWER CHECK
Posted: Fri May 29, 2020 12:38 pm
by Velocomp
Use the Device/Setup Device wizard in Isaac. You shouldn't have to alter anything afterwards.
Re: LONG ROUTE MTB POWER CHECK
Posted: Sat Oct 03, 2020 6:04 am
by worms1414
Please share the settings you use for MTB in Isaac.
Thank you very much
Re: LONG ROUTE MTB POWER CHECK
Posted: Sat Oct 03, 2020 10:34 am
by Velocomp
Crr = .007
Re: LONG ROUTE MTB POWER CHECK
Posted: Sat Oct 03, 2020 2:31 pm
by worms1414
Thank you.
Although I would like to know all the possible settings that can be selected, what exactly is worth using.
Re: LONG ROUTE MTB POWER CHECK
Posted: Sat Oct 03, 2020 2:42 pm
by Velocomp
This is the only setting you need to adjust manually for MTB. All other settings are made in the Isaac Device Setup wizard.
Re: LONG ROUTE MTB POWER CHECK
Posted: Sat Oct 03, 2020 3:03 pm
by worms1414
These other settings are of interest to me, I have provided them in a link in another topic, let me enter them here to check if they are correct.
Since August 20, I have been struggling with the right settings, because something still does not work as it should, I have such feelings.
Today, for this reason, I bought a package for the Lite version of the V3 version, I hope it will bring a positive result.
I have deleted all profiles and tomorrow I am going to carry out a calibration drive again, it is a pity that I have not received the key yet, so that the whole ride will be saved.
My presets:
https://photos.app.goo.gl/x6PkYzbkrdcy5DBdA
John.
You're great, thanks for the quick response.