merging 2 files

Post Reply
naavt
Posts: 38
Joined: Wed May 30, 2018 7:40 am

merging 2 files

Post by naavt »

Only today I've became aware that I shouldn't have shut my PP down for a coffee break, since it created 2 files for my ride. One before the break an one after.

Just to make sure, I want to ask if PP has to stay on during a break. I've shut it off since the bike was lifted to be parked near the site and I didn't want to mess with the calibrated sensors.

I've also noted that VeloTrack APP didn't registered the ride after the break. Despite being on all the time, I only have the tracked power of the first part of the ride.

Regarding this issue, is it possible to merge the 2 files for this ride?

Thanks!
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: merging 2 files

Post by Velocomp »

1) Open the first ride file in Isaac

2) Use the command below to merge the files
The attachment Screen Shot 2018-07-16 at 11.20.48 AM.png is no longer available
3) After merging the files, use the command below to add full GPS data:
Screen Shot 2018-07-16 at 11.20.48 AM.png
Screen Shot 2018-07-16 at 11.20.48 AM.png (163.86 KiB) Viewed 2805 times
4) Make sure you save the merged file
John Hamann
naavt
Posts: 38
Joined: Wed May 30, 2018 7:40 am

Re: merging 2 files

Post by naavt »

Thanks for the instructions and quick reply.

So in reality, it's best to shut it off for a break if I want to move the bike around (lift it), and do the merging afterwards, right?

Cheers.
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: merging 2 files

Post by Velocomp »

PP will put itself to sleep automatically. I don't think any manual intervention is needed.
John Hamann
naavt
Posts: 38
Joined: Wed May 30, 2018 7:40 am

Re: merging 2 files

Post by naavt »

Velocomp wrote: Mon Jul 16, 2018 12:50 pm PP will put itself to sleep automatically. I don't think any manual intervention is needed.
Thanks once again!
Post Reply