Velocomp Garmin Powerpod handlebar mount trouble

Post Reply
Speedyg
Posts: 33
Joined: Thu Nov 30, 2017 4:35 am

Velocomp Garmin Powerpod handlebar mount trouble

Post by Speedyg »

Have just purchased the V-comp Garmin/Powerpod combo mount and tightening the Powered as much as possible with the existing Powered thumbscrew it just isn't totally tight allowing for some changes in skew if there's a big bump in the ride. What to do??
flahutewannabe
Posts: 67
Joined: Sat Apr 16, 2016 1:40 pm

Re: Velocomp Garmin Powerpod handlebar mount trouble

Post by flahutewannabe »

I once inadvertently put the bolt in from the wrong side (into the brass bushing first rather than through the plastic side into the brass) and had the same thing. You might confirm you're inserting the thumbscrew from the correct side.

Even with the correct side, it does take some cranking down to get it tight.
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Velocomp Garmin Powerpod handlebar mount trouble

Post by Velocomp »

Speedyg wrote: Mon Jul 09, 2018 2:33 pm Have just purchased the V-comp Garmin/Powerpod combo mount and tightening the Powered as much as possible with the existing Powered thumbscrew it just isn't totally tight allowing for some changes in skew if there's a big bump in the ride. What to do??
Please email technicalsupport@velocomp.com There is an easy fix Tom will tell you how to do.
John Hamann
Speedyg
Posts: 33
Joined: Thu Nov 30, 2017 4:35 am

Re: Velocomp Garmin Powerpod handlebar mount trouble

Post by Speedyg »

Inserted screw from the other side and it's fine!
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Velocomp Garmin Powerpod handlebar mount trouble

Post by Velocomp »

:-)
John Hamann
Post Reply