Please review my ride and calibration

Post Reply
clamic
Posts: 4
Joined: Sat May 05, 2018 7:22 am

Please review my ride and calibration

Post by clamic » Sun Jun 03, 2018 8:29 am

Hi,
could you please review my ride(after calibration).I used a Mountainbike and the mean wattage was about 25-30% higher than expected(compared to my other Mountainbike with a 4iiii powermeter).I also provided the original calibration ride file.

Regards
Michael
Attachments
iBike_06_03_2018_1139_30_km.ibr
(263.88 KiB) Downloaded 9 times
iBike_05_31_2018_1015_4_km_CalRide.ibr
(46.11 KiB) Downloaded 8 times

Velocomp
Velocomp CEO
Posts: 4921
Joined: Fri Jan 11, 2008 9:43 am

Re: Please review my ride and calibration

Post by Velocomp » Sun Jun 03, 2018 2:59 pm

Your rolling resistance Crr was too high. I set it to a mountain bike level, .008.

Load the attached profile into your unit and all will be well.
Attachments
clamic_06_03_2018_1139_30_km.ibr
(400.17 KiB) Downloaded 8 times
clamic.ibp
(544 Bytes) Downloaded 8 times
John Hamann

clamic
Posts: 4
Joined: Sat May 05, 2018 7:22 am

Re: Please review my ride and calibration

Post by clamic » Mon Jun 04, 2018 8:50 am

Thx very much!

clamic
Posts: 4
Joined: Sat May 05, 2018 7:22 am

Re: Please review my ride and calibration

Post by clamic » Mon Jun 04, 2018 9:16 am

May I also ask for a review of my roadbike file,the values looked more reliable.

thx again
Michael
Attachments
iBike_05_30_2018_1646_2_km.ibr
(20.55 KiB) Downloaded 11 times

Velocomp
Velocomp CEO
Posts: 4921
Joined: Fri Jan 11, 2008 9:43 am

Re: Please review my ride and calibration

Post by Velocomp » Thu Jun 07, 2018 9:49 pm

Looks fine!
John Hamann

clamic
Posts: 4
Joined: Sat May 05, 2018 7:22 am

Re: Please review my ride and calibration

Post by clamic » Fri Jun 08, 2018 4:01 am

Many thanks!

Post Reply