Page 1 of 1
firmware update to 6.32
Posted: Sat Apr 28, 2018 4:32 pm
by jpl315
I just installed this and wanted to know how I can show the battery life on a Garmin 520. thanks
Re: firmware update to 6.32
Posted: Sat Apr 28, 2018 5:21 pm
by Velocomp
1) On your Garmin, select "Power Sensor". This will be your PowerPod
- IMG_0366.jpeg (206.11 KiB) Viewed 7141 times
2) Select "Sensor Details"
- IMG_0370.jpeg (192.13 KiB) Viewed 7134 times
3) Select "About"
- IMG_0367.jpeg (176.78 KiB) Viewed 7132 times
4) You will see your current Battery Status at the top of the "About" menu
- IMG_0372.jpeg (200.62 KiB) Viewed 7131 times
A. "New" is greater than 90% battery charge
B. "Good" is 70% to 89% charge
C. "OK" is 35% to 69%
D. "Low" is 20% to 34%
E. Critical is less than 20%
Re: actualización de firmware a 6.32
Posted: Sun Apr 29, 2018 6:19 am
by ANGEL T
Hello:
how long does the battery last in each of the levels?
regards
Re: firmware update to 6.32
Posted: Mon Apr 30, 2018 3:33 pm
by stewartclark2002
After updating to 6.32 this is what I'm seeing on my Edge 800. Is the Edge 800 not compatible with this change?
Re: firmware update to 6.32
Posted: Mon Apr 30, 2018 4:40 pm
by Velocomp
Hmm...this is a question for Garmin.
Re: actualización de firmware a 6.32
Posted: Mon Apr 30, 2018 4:43 pm
by Velocomp
ANGEL T wrote: ↑Sun Apr 29, 2018 6:19 am
Hello:
how long does the battery last in each of the levels?
regards
That's kind of like asking how long your flashlight batteries keep the light bright
How long the batteries stay at each level depends on the length of your rides, how charged the unit is when you start riding, and how long it has been since you last charged your unit.
If you start with a fully charged PP, you can ride for over 20 hours continuously.
Re: firmware update to 6.32
Posted: Mon Apr 30, 2018 5:26 pm
by speedyvelo
Thxs John
-=terry=-
Re: firmware update to 6.32
Posted: Thu May 03, 2018 3:41 am
by FedeSp
- 15253332634661909782942.jpg (96.07 KiB) Viewed 6940 times
This is garmin 810
Re: firmware update to 6.32
Posted: Thu May 10, 2018 5:33 am
by dabaracus
Does anyone know how to check this on the wahoo bolt?
Re: firmware update to 6.32
Posted: Mon Jun 18, 2018 1:35 pm
by mschenkel
I'm just about ready to retire my Garmin 810 and get a Wahoo Elemnt Bolt, so I'm curious about whether this data is accessible on the Wahoo Elemnt Bolt as well. Can anyone confirm that the PowerPod battery status can be displayed on the Bolt?
Re: firmware update to 6.32
Posted: Mon Jun 18, 2018 2:38 pm
by Velocomp
We follow the standard ANT+ protocol. I'm guessing Wahoo does, too; if so, you should be able to access the battery info in ELEMNT. Make sure your using the Wahoo in ANT+ mode.
Re: firmware update to 6.32
Posted: Thu Jun 21, 2018 8:15 am
by stewartclark2002
Is there any news on this updates compatibility with the Edge 800?
Re: firmware update to 6.32
Posted: Thu Jun 21, 2018 9:04 am
by Velocomp
stewartclark2002 wrote: ↑Thu Jun 21, 2018 8:15 am
Is there any news on this updates compatibility with the Edge 800?
I think this is up to Garmin, not us. We are providing the battery information according to their ANT spec. The bike computer manufacturer has to decide how (and if) to display the data.