Help Cannot Calibrate

Post Reply
baylisstic
Posts: 2
Joined: Mon Apr 23, 2018 7:18 am

Help Cannot Calibrate

Post by baylisstic »

Good morning
I did a factory reset of my Powerpod and now I cannot seem to get it to do the 10 min O&B ride let alone the 5 min cal ride.
I am able to pair with my sensors
When I go out on the 5 min calibration ride I can see it count from 1 to 100.
It then starts to count again from 1 to 100 over and over again.

Thank you
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Help Cannot Calibrate

Post by Velocomp »

Likely your PP is pointed too far upwards, like the one in the image.

The word "PowerPod" should be approximately level to the ground.

Reposition your PP then try a new cal ride. Hopefully things will be fixed.
Attachments
Screen Shot 2018-04-23 at 3.17.13 PM.jpg
Screen Shot 2018-04-23 at 3.17.13 PM.jpg (192.59 KiB) Viewed 1476 times
John Hamann
baylisstic
Posts: 2
Joined: Mon Apr 23, 2018 7:18 am

Re: Help Cannot Calibrate

Post by baylisstic »

Thank you John will give that try
If that doesn't help I will repost.
If it does help I will not so Thank you in advance if that rectifies the problem
Post Reply