DFPM

Post Reply
JoseJ
Posts: 51
Joined: Sun Sep 08, 2013 5:11 pm

DFPM

Post by JoseJ »

Hello..if I pair a DFPM..to my newton...and the settings are turned on....... the meassurements in the screen are supossed to be de ones from de DFPM...not from the newton... but the NP..IF and TSS factors that newton shows..will these factors also come from the DFPM?
When downloading to isaac..will I see both measurements..DFPM and newton?
Thank you
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: DFPM

Post by Velocomp »

If you have the DFPM on, then TSS etc will be calculated from the DFPM measurements.

Yes, you can see both measurements in Isaac. Check the View DFPM box to see DFPM measurements.
John Hamann
JoseJ
Posts: 51
Joined: Sun Sep 08, 2013 5:11 pm

Re: DFPM

Post by JoseJ »

I have paired a DFPM..stages ...dfpm settings are on...the device is correctly paired as far as i know ..but power in the screen is 0...power and cadence are on and off....but most of the time..power fails and cadence as well
the DFPM is working well because my garmin unit reads all the measurements with no problem at all.
what should I do?
thank you and Merry Christmas.
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: DFPM

Post by Velocomp »

If cadence is zero then power will be zero too.

You need to get a solid cadence reading before checking anything else...
John Hamann
Post Reply