Large difference in readings Newton to Powertap

Post Reply
smeagolsmy
Posts: 8
Joined: Thu Mar 27, 2014 3:05 pm

Large difference in readings Newton to Powertap

Post by smeagolsmy »

Hi, I did a ride yesterday, and on looking at the ride file, noticed a big difference between the Newton figures, and the Powertap figures, can you spot any reason why? I will check the calibration of the Powertap next ride, but the ave power figure for the ride from the Newton at 117w seems pretty low?
Attachments
iBike_05_02_2015_0753_70_Miles.ibr
(1.19 MiB) Downloaded 333 times
Velocomp
Velocomp CEO
Posts: 7793
Joined: Fri Jan 11, 2008 8:43 am

Re: Large difference in readings Newton to Powertap

Post by Velocomp »

Nice ride!

Looks like your wind sensor became blocked; notice the severe "icicles" between hour 1 and 4:30. Rain?

I fixed this with Tools/Repair ride for blocked wind sensor.

Also: either your PT is off or your Newton settings are wrong. I fixed the profile so they would be close for this ride; you should check with another ride after you're sure your PT is properly calibrated...
Attachments
iBike_05_02_2015_0753_70_Miles_JRH.ibr
(1.27 MiB) Downloaded 334 times
SmeagolJRH.ibp
(424 Bytes) Downloaded 320 times
John Hamann
Post Reply