Zero Breaking

Post Reply
User avatar
lorduintah
Posts: 642
Joined: Fri Jan 11, 2008 9:37 am
Location: Plymouth, MN

Zero Breaking

Post by lorduintah »

It is likely that using 5 second recording intervals that breaking does not show up as any contribution? Correct? I changed from 1 second intervals and a low percentage went to zero.
Velocomp
Velocomp CEO
Posts: 7804
Joined: Fri Jan 11, 2008 8:43 am

Re: Zero Breaking

Post by Velocomp »

If' you're talking about the "breaking" stat in the iBike 2 software, then remember that you have to analyze your ride before this number will appear.
John Hamann
User avatar
lorduintah
Posts: 642
Joined: Fri Jan 11, 2008 9:37 am
Location: Plymouth, MN

Re: Zero Breaking

Post by lorduintah »

John -

Have done so. Or I never stopped or slowed down;-)

When I used the 1 second rate, I would get about 2% breaking as a typical factor for the same ride.

It looks like I break so little anyway that at the 5 second record interval, breaking is not often captured. I am getting 0.5% on some ride.

Tom
Post Reply